cool_tech
11-11-2008, 08:41 AM
hi guys
just after some information on trane cgadd series chiller. (old recip)
it has been going out on hrd-5 fault, which is a problem with the rcm module. i changed rcm modules with spae i had and it ran for a few days then it faulted again and when it powers down it resets its own fault.
so i spoke to some guys at work and they said it was from a eprom fault meaning a sensor/ solonoid / probe causing problem so i replaced a suspect solonoid and it worked for 24 hours it has now gone down again any help greatly appreciated.:cool:
just after some information on trane cgadd series chiller. (old recip)
it has been going out on hrd-5 fault, which is a problem with the rcm module. i changed rcm modules with spae i had and it ran for a few days then it faulted again and when it powers down it resets its own fault.
so i spoke to some guys at work and they said it was from a eprom fault meaning a sensor/ solonoid / probe causing problem so i replaced a suspect solonoid and it worked for 24 hours it has now gone down again any help greatly appreciated.:cool: