PDA

View Full Version : carrier 30rh control panel


costacool
20-10-2008, 07:58 PM
Hi,
New to this. hope you can help. Need to replace a circuit board on a Carrier 30RH, therefore i need to re program it. Can not find the codes/instruction.
Brian_UK
20-10-2008, 11:19 PM
Welcome, have you tried the Carrier website ?

If not try here..
http://www.uk.carrier.com/products/Chiller_HeatPumps/30RH040_240_B_Series.htm
click on Product Information and download what you need.
Gibbo
21-10-2008, 12:19 AM
I am afraid your out of luck you will need to get your local Carrier Service ofiice to download the software to the board.
costacool
21-10-2008, 10:44 AM
unfortunately am in Span and local carrier are not helpful! have tried the uk website not much there, just wondered if anyone out there had actually don't it.
Gibbo
26-10-2008, 08:31 PM
unfortunately am in Span and local carrier are not helpful! have tried the uk website not much there, just wondered if anyone out there had actually don't it.
I'm afraid only Carrier Service have the software download. Where did you buy the board. They should have told you you need to have software downloaded to it.