coolments
20-09-2008, 01:42 PM
Hi All
Mitsi Heavy Industries: SRK50ZD-S wall mount
Just round at a friends and his AC wont heat, so naturally I take a look.
Unit works fine in cooling, when switched over to heating it runs for around a minute then stops and the timer light on the front blinks twice, sure its trying to tell me something but not being a Mitsi Heavy fan i dont have any manuals for them.
Messed about and found the following, if i pull the power on the reversing valve while the unit calls for heating then the unit will not lock out and run meerily away thinking its heating, so i thought its a sensor problem and pulled them of the coils to see if that helped but no.
Any one else had this problem or have a manual handy to tell me what the timer light flashing is telling me.
Mitsi Heavy Industries: SRK50ZD-S wall mount
Just round at a friends and his AC wont heat, so naturally I take a look.
Unit works fine in cooling, when switched over to heating it runs for around a minute then stops and the timer light on the front blinks twice, sure its trying to tell me something but not being a Mitsi Heavy fan i dont have any manuals for them.
Messed about and found the following, if i pull the power on the reversing valve while the unit calls for heating then the unit will not lock out and run meerily away thinking its heating, so i thought its a sensor problem and pulled them of the coils to see if that helped but no.
Any one else had this problem or have a manual handy to tell me what the timer light flashing is telling me.