View Full Version : a/c daikin
ricky13
07-09-2008, 12:04 PM
fitted p.c.b to cond unit on sat and showed
PJ fault code failure of set capacity resistor
what does it mean by this. ricky
multisync
07-09-2008, 01:33 PM
fitted p.c.b to cond unit on sat and showed
PJ fault code failure of set capacity resistor
what does it mean by this. ricky
It means you are a rude ignorant git who comes here and demands answers without any grace..
Eff off, or grow some manners PDQ
Multisync
london
:D Lol :D Laughed for a good 5 minutes
eggs
The Viking
07-09-2008, 01:44 PM
Deep breaths now Multi...
There are 2 different options, depending on the model you are working on (Yes sometimes it feels like all you do is asking newcomers for more info, model no's are essential!)
First of all, what you describes is a classic symptom of failure to RTFM.
If you read the leaflet that came with the new board, you would have known the answer.
You should either: have moved a plug with a resistor in it from the old PCB to the new PCB
OR: set some dip-switches on the new PCB.
As I said earlier, it will depend on which model you are looking at.
sinewave
10-09-2008, 07:29 PM
It means you are a rude ignorant git who comes here and demands answers without any grace..
Eff off, or grow some manners PDQ
Multisync
london
:D :D :D :D :D :D :D
And I thought it was just me!
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.