adrianshanov
23-07-2008, 09:42 PM
Hello everyone,
I was asked to educated myself on R134a refrigeration system design. I know the theory behind the whole system but what I lack is how to start from a given volume of space (i.e. 25 cu.ft) and then start selecting my evaporator (coil size, width X height X depth, tube I.D. , wall thickness, Fin thickness spacing, etc.) and then condenser, and compressor and cap tube length, thickness (pressure drops?)
I am sorry if this is a repeat thread, I had to start from somewhere.
Thank you all, and looking forward to learning more...
adrian
I was asked to educated myself on R134a refrigeration system design. I know the theory behind the whole system but what I lack is how to start from a given volume of space (i.e. 25 cu.ft) and then start selecting my evaporator (coil size, width X height X depth, tube I.D. , wall thickness, Fin thickness spacing, etc.) and then condenser, and compressor and cap tube length, thickness (pressure drops?)
I am sorry if this is a repeat thread, I had to start from somewhere.
Thank you all, and looking forward to learning more...
adrian