bernard
02-07-2008, 08:33 PM
Hi
Everyone seems to be fitting invertors to condenser motors which is ok ,the problem I,m finding is they fit this nice invertor with a built in cooling fan then seal it in a air tight panel so it re-circulates the air.Some are fitting a back up pressure switch so when the invertor overheats and fails the pressure switch cuts in and runs the fans as normal however some are not so the pack crashes,then I drive 200 mile round trip.Which really defeats the purpose.Is this green attitude really working....
Regards Bernard
Everyone seems to be fitting invertors to condenser motors which is ok ,the problem I,m finding is they fit this nice invertor with a built in cooling fan then seal it in a air tight panel so it re-circulates the air.Some are fitting a back up pressure switch so when the invertor overheats and fails the pressure switch cuts in and runs the fans as normal however some are not so the pack crashes,then I drive 200 mile round trip.Which really defeats the purpose.Is this green attitude really working....
Regards Bernard