bobjob
17-05-2008, 12:01 PM
Hi all
After working on 4 Daikin unit at a large house, the owner asked me to carry out maintenance on his Robur chiller model F115151132 which provides chilled water to a lennox fan unit.
I checked and cleaned the condenser coil which was very dirty, checked fan, fan sail switch, chilled water temp on and off, pump v belt , electrics etc,
Everything Ok. supply temperature to the Lennoxs at 7c
Is there anything else i need to do on the refrigeration side (Gas guy will have to do the burner and flue)
regards Bobjob
After working on 4 Daikin unit at a large house, the owner asked me to carry out maintenance on his Robur chiller model F115151132 which provides chilled water to a lennox fan unit.
I checked and cleaned the condenser coil which was very dirty, checked fan, fan sail switch, chilled water temp on and off, pump v belt , electrics etc,
Everything Ok. supply temperature to the Lennoxs at 7c
Is there anything else i need to do on the refrigeration side (Gas guy will have to do the burner and flue)
regards Bobjob