Refrigeration-Engineer.com forums
>
TECHNICAL REFRIGERATION
>
Fundamentals
> Brazing tungsten to brass: can it be done?
PDA
View Full Version :
Brazing tungsten to brass: can it be done?
DaBit
13-08-2003, 10:09 AM
I probably have to braze a tungsten or gold plated tungsten needle onto a piece of brass. Can this be done using 45% Ag rods? If not, what rods do I need?
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.