View Full Version : contorl system
Noori
10-03-2008, 10:41 PM
Hi.
I have an clamavita air cooled chillers with 6- reciprocating piston compressor Copland type with problem in the old type main control system and I want to replace it with a new one. please can u advice me which control can I use .
The chillers has two circuits with 3-compressors and 6- fans foe each.
The Viking
10-03-2008, 11:05 PM
It all depends on how complicated you want to make it.
In the simplest form, all you need is a multi-stage thermostat , a couple (well, 6) contactors and a bunch of relays.
On the other end, you could fit an outstation, a bunch of relays and take full control from a BMS system.
The options are endless and the sky is the limit (well, one assumes the customer's budget also will, somewhat, limit the choices available)
nike123
10-03-2008, 11:26 PM
Hi.
I have an clamavita air cooled chillers with 6- reciprocating piston compressor Copland type with problem in the old type main control system and I want to replace it with a new one. please can u advice me which control can I use .
The chillers has two circuits with 3-compressors and 6- fans foe each.
I would go with Elywell Energy XT
http://tinyurl.com/yubo9c
or Carel MicroChiller3 if compressors are hermetic ones:
http://tinyurl.com/yubo9c
or Carel pCO if they are semihermetics:
http://tinyurl.com/3b9u5t
Noori
11-03-2008, 01:13 AM
Hi
Thank u so much for your response
Noori
It all depends on how complicated you want to make it.
In the simplest form, all you need is a multi-stage thermostat , a couple (well, 6) contactors and a bunch of relays.
On the other end, you could fit an outstation, a bunch of relays and take full control from a BMS system.
The options are endless and the sky is the limit (well, one assumes the customer's budget also will, somewhat, limit the choices available)
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.