View Full Version : cylinder adapter
Guys
does anyone know where i can obtain one of these:
http://www.toolfetch.com/Category/Welding/Welding_Consumables/312-415.htm?per=15&sort=2&page=3
i bought a nitrogen test rig off SRW and it comes with a female connection, hence the adapter:D
Thanks
alec
Toosh
07-02-2008, 07:34 AM
Hi Al, Contact that site and ask them the cost of shipping it to you.
Regards Norm
Grizzly
07-02-2008, 07:43 AM
Alec.
Try BOC/ Their Agents, ( Or their equivlant in Ireland). Basically I assume any " Industrial Gasses" Stockist should be able to help.
Or have you already been there? In which case
the post is self explainatory!
And Norm's is a good suggestion.
Grizzly.
thanks for the replies, i'm still awaiting an answer from the site, i'll probably try to get something made up:D
thanks again
alec
Brian_UK
08-02-2008, 12:33 AM
The adaptor fits a universally standard gas bottle connector.
I would imagine that your regulator has a standard female thread in it.
Have you tried your local, nearest, gas bottle supplier or supplier of pressure regulators, they should be able to supply spare parts.
Come to that, why not go back to SRW ?
monkey spanners
08-02-2008, 12:37 AM
Welding supplies company should be able to get a new 'thingy' to screw into your existing regulator and to fit standard bottles.
Grizzly
10-02-2008, 01:44 AM
Alec
Have a look at these 2 links, it's the best I can find.
I hope they are of use?
Grizzly
http://www.wellyweld.com/categories/Adaptors_163.aspx
http://www.wellyweld.com/categories/Extensions_162.aspx
Grizzly
Thanks for that, i've had to order an adaptor from the states, SRW don't want to know!! thanks for the help fellas
Alec
The Viking
10-02-2008, 02:36 AM
Alec,
Can I just ask you to clarify one thing?
You are going to fit this adaptor straight in to a regulator, without any hoses in between, aren't you?
Reason I ask,
The only test rigs I ever seen has been designed to fit downstream of a regulator fitted on the cylinder.
Normally I would expect to see a hose coming from the test rig with a female connector for a regulator on it's end.
These rigs would not been designed to take the pressure in the OFN cylinders and would probably explode if connected without a regulator...
(And I never seen a regulator sold without the cylinder connector in place, as it's a vital part of the regulator, to be strength tested by the manufacturer)
Hi Viking
The adaptor is to fit to a 2 stage nitro regulator, not to attach the test rig direct to the bottle, i presume it being a brass fitting that it can handle the pressure??:eek:
thanks for the advice though
al
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.