View Full Version : r415b
sharonrod
22-01-2008, 07:36 PM
hi guys
what do you think of this gas that is suppose to be a drop in for r12 ? have heard different opinions about it, some say its good some say that it can do damage cause there is a high percentage of r22 in it.. what do you guys think?
regards
steve
Hi Steve,
Never used it but Im sure plenty of other guys can comment.....
dsp
The Viking
22-01-2008, 08:42 PM
Steve,
I never used it but if what you say are true (about high R22 content), then I can't see the point of going down that route.
Come 2010 and R22 will not be produced either and then you are back where you are now with R12.
sharonrod
23-01-2008, 03:07 PM
did some research and found that r415 has 25% r22 and 75% r152a. over here in malta they are selling it as a drop in for r12... still have serious doubts abouut it..
Argus
23-01-2008, 04:51 PM
did some research and found that r415 has 25% r22 and 75% r152a. over here in malta they are selling it as a drop in for r12... still have serious doubts abouut it..
As the Norseman said, it will effectively disappear from the market at the end of 2009, because it has HCFC (R22) in it.
Don't touch it. You can't legally use it after that date.
.
monkey spanners
23-01-2008, 06:25 PM
I've been using R413A as a drop in for R12 in cars and ice builder systems without any major problems.
sharonrod
23-01-2008, 06:31 PM
thanks guys
you re always a great help
rodolfoargentin
08-03-2010, 05:08 AM
sorry, have pressure & temperature table (saturation) r415b
Rodolfo Scheiner
Santa Fe - Argentina
rodolfoargentin
08-03-2010, 05:11 AM
sorry, have pressure & temperature table (saturation) r415b
Rodolfo Scheiner
tecnocompresores@arnet.com.ar
Santa Fe - Argentina
rodolfoargentin
15-03-2010, 04:37 AM
I use Google translator. English Spanish
1 years for technical information. No one answers
Sorry, have pressure & temperature table (saturation) r415b
Reference guide, like this, for R415B www2.dupont.com/Refrigerants/es_MX/assets/downloads/refrig_temp_guide.pdf
Rodolfo Scheiner
tecnocompresores@arnet.com.ar
Santa Fe - Argentina
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.