View Full Version : Compressor handbook / guide
Grizzly
26-11-2007, 11:41 PM
I have a handy little booklet I have produced by printing off the down loadable pdf.
Was offered by the Thermacom Group but sadly no longer it seems?
Link listed below.
It contains useful data on how to carry out field insulation testing (Megga).
Compressor motor connections :- Star/Delta, Direct on-line, single phase, part wind etc. etc.
With lots of other useful stuff as well.
Enjoy!
Grizzly http://www.refrigeration-engineer.com/forums/images/icons/icon14.gif
Now available at mediafire as a download:-
http://www.mediafire.com/?tmwopnzcoxy
Brian_UK
27-11-2007, 12:25 AM
Nice one Grizzly, thanks.
Renato RR
27-11-2007, 01:57 PM
Wery clear and useful piece of paper.
Thank you,
Renato
REEFER-TEK
28-11-2007, 03:47 PM
Thanks good info
tao77
29-11-2007, 03:51 PM
Thanks, very detailed manual
REEFER-TEK
29-11-2007, 04:53 PM
Great book thanks
on4hf
29-11-2007, 09:10 PM
Thanks Grizzly for sharing this with us!
;)
Eric.
marc5180
02-12-2007, 10:33 PM
Great link, Grizzly.
Thanks:)
Suta Eugen
12-12-2007, 10:59 AM
Its a useful book .
thank you
EngrinQatar
12-12-2007, 08:36 PM
Thanks for sharing
lgdcool
21-12-2007, 05:55 PM
Thanks for sharing!
Giannis
21-12-2007, 10:50 PM
Very good ! Thank you
Suta Eugen
28-02-2008, 01:03 PM
Thanks Grizly !
You have something about remanufacturing compressors procedure ? ,tolerance ,etc .
Thanks
Springbok
28-02-2008, 02:50 PM
Nice one Grizly
Kh1971
01-03-2008, 07:38 AM
nice thanks alot
khalid
johnyfreon
06-03-2008, 01:25 AM
nice!! thank a bundle
Kh1971
06-03-2008, 10:12 AM
thanks for your info, keep shining my star
mustafa
06-03-2008, 08:48 PM
thank u dear
Brad Chen
14-03-2008, 04:27 AM
thanks.good book.
jack_vn
14-03-2008, 06:51 AM
that is a great book, thank you a lot !!!!!!!!!!!!!
amfred
18-03-2008, 08:48 AM
thanks, i may not need it now but looks lots of information there
Grizzly
18-03-2008, 08:34 PM
A big thanks to all who have replied!
We all try to help and it is nice when people acknowledge this.
Cheers Grizzly
FreezerGeezer
16-10-2008, 11:49 AM
Grizzy, I'd love a copy but it seems your link is broken - the website it points to is down? Any chance you could e-mail me a pdf?
Grizzly
16-10-2008, 07:15 PM
Grizzly, I'd love a copy but it seems your link is broken - the website it points to is down? Any chance you could e-mail me a pdf?
FreezerGeezer
Yep their website is throwing a wobbly!
It would be a pleasure to email you.
Sadly I can't download your v card to get your email address!
So pm with it and I will send.
Later when the tribe have finished with the computer.
I will look and see if I can post a new link?
Grizzly
felixfab_93
16-12-2008, 06:53 AM
Hello Grizzly
can send your guide / hand to my email to?
Thanx
My email : felixfab83@gmail.com
Grizzly
16-12-2008, 04:37 PM
Hello Grizzly
can send your guide / hand to my email to?
Thanx
My email : felixfab83@gmail.com
felix try the new link I have posted.
Grizzly
TAARSEM
16-12-2008, 10:46 PM
thank you sir.
porkey 1200
17-12-2008, 12:41 AM
hey thanks for that info . do u have any on vrf compressors .
felixfab_93
17-12-2008, 01:24 AM
Thanx Grizzly it work
Grizzly,
many thanks,a very important compressor
guide.
regards,
james 100
17-12-2008, 08:30 PM
Very usefull, thanks.
superswill
17-12-2008, 08:35 PM
top link, a great share
many thankx
oilzee
17-12-2008, 11:32 PM
Hello Grizzly , thanks a lot i will keep it beside me.
sachinm08
22-12-2008, 01:19 PM
Thanks. good data.
nh3wizard
22-12-2008, 01:56 PM
Once again, Thanks Grizzly
paddyaircon
22-12-2008, 04:24 PM
thanks- very useful
mfakazi
23-12-2008, 08:35 PM
awsome stuff,really good....thanks again grizzly..oh Merry xmas
glenn1340
23-12-2008, 09:37 PM
Thanks Grizzly.
I`ve been looking for this kind of info since my van was nicked last year along with all my tools, vibration monitoring equipment and years of accumalated manuals and hand written info on pressure settings, trip limits etc.
Once again, thanks very much for taking the time to put this up.
Happy Xmas and new year.
Regards Glenn
Grizzly
24-12-2008, 01:28 PM
Thanks Grizzly.
I`ve been looking for this kind of info since my van was nicked last year along with all my tools, vibration monitoring equipment and years of accumalated manuals and hand written info on pressure settings, trip limits etc.
Once again, thanks very much for taking the time to put this up.
Happy Xmas and new year.
Regards Glenn
Thanks to everyone who bothered to say thanks.
It is not just me as there are lots of us that take time and trouble to post.
So let's all take the time to thank others when appropriate within the New Year.
Glen PM me and I can let you have more stuff of a similar style!
I have been there and it Hurts like Hell!
Doesn't it!
I don't know about anyone else, but I certainly am looking forward to the break over the "Holidays".
Cheers Steve.
mcunliffe4
24-12-2008, 05:16 PM
cheers bab well good
botrous
25-12-2008, 08:54 PM
Thanks Grizzly
Peter_1
25-12-2008, 10:24 PM
Just noticed this link now Grizzly and busy with downloading now.
Thanks mate.
Plank!
25-12-2008, 10:42 PM
Well its Christmas so i'll say thanks too. ;)
Its a very useful file to give to the apprentices at work.
Cheers Steve.
Steve
Reeferman27
26-12-2008, 10:35 AM
Thanks for the info.Hope you had a good one?:D
glenn1340
26-12-2008, 11:57 AM
Thanks for offering to send me more info Grizzly but I should have mentioned most of my work is on large industrial air compressors so your info would probably not be in my field (let alone go way over my head!!) but I do often work on refrigerated compressed air dryers. I have, by the way, been removing redundant split units and re-installing them in another part of a plant (pidgeons...don`t you just love the mess they make) which I found very interesting and, at times, frustrating which is how I found this very useful forum.
Once again, thanks very much for the kind offer.
Regards,
Glenn
Grizzly
26-12-2008, 12:17 PM
Thanks for offering to send me more info Grizzly but I should have mentioned most of my work is on large industrial air compressors so your info would probably not be in my field (let alone go way over my head!!) but I do often work on refrigerated compressed air dryers. I have, by the way, been removing redundant split units and re-installing them in another part of a plant (pidgeons...don`t you just love the mess they make) which I found very interesting and, at times, frustrating which is how I found this very useful forum.
Once again, thanks very much for the kind offer.
Regards,
Glenn
No problem Glenn,
We all like to help when possible that,s the beauty of the forum!
Most of us have been there ourselves and still are at times.
You are not alone with the amazement of the breadth of knowledge available on the forum.
Sometimes it scares me to answer something for fear of looking stupid amongst my Peers!
And for all that have replied I THANK YOU.
Grizzly
icecube51
27-12-2008, 06:05 PM
thanks Grizzly, put it in use already. made a copy for the Van. never now when needed again.
Ice
Peter_1
27-12-2008, 06:09 PM
I'm glad an old thread helped others again.
michaelm
28-12-2008, 01:54 AM
B”H
Hello Grizzly,
Thanks a lot. Sweet, healthy, happy and successful years to you and yours.
Suta Eugen
29-12-2008, 02:49 PM
Thank You Grizzly and a happy new year !
nicolacozma
29-12-2008, 04:56 PM
Thanks and congratulations for sharing it with others.
Suta Eugen
12-02-2009, 09:57 AM
Grizzly ,
Thank you for the book is very good !
winefridge
12-02-2009, 11:22 AM
Thanks for sharing
yousufrafi
14-02-2009, 04:34 PM
Verry usefull, thanks.
paulwild
14-02-2009, 04:52 PM
thanks grizzly just saved it to my lap top great stuff
cesarnino
18-02-2009, 11:13 PM
thank you grizzly
james770
01-03-2009, 05:49 AM
Thanks Grizzly for sharing
pancharathnam
02-03-2009, 02:37 AM
Thank you GRIZZLY
koala10
04-03-2009, 08:48 PM
thank you kardeşş sağolasın
pingping
10-03-2009, 02:25 AM
thank you grizzly
nambkdn
12-03-2009, 10:57 AM
Thanks very much for sharing
mkilickap
06-10-2009, 11:02 PM
thanks, it's perfect
wmgino
19-10-2009, 03:32 AM
Great Information this will be helpful to my students
D.D.KORANNE
21-10-2009, 09:19 AM
Indeed useful for all
D.D.KORANNE
18-12-2009, 10:22 AM
Can u please reload this link ? Or is it still on ?
Much obliged, Grizzly. Very helpful book. :)
ICE/RUNNER
18-12-2009, 06:15 PM
Thanks great download. Have a great Christmas and a good new year. :D
shaman
27-12-2009, 10:45 AM
Thanks for the great info
agus_bdl
18-01-2010, 06:59 AM
file was delete,,plz upload new link..thanks..
panchomp
19-01-2010, 12:34 AM
thank you sr.
agus_bdl
07-02-2010, 08:15 AM
thanks for share
agus_bdl
07-02-2010, 08:16 AM
thanks for link
GRICE
11-02-2010, 06:17 PM
Thanks grizzly . Its a useful handbook for compressor -keep walking!
Akram Hamza
12-02-2010, 09:07 AM
Thanks alot
yback01
16-03-2010, 12:31 PM
Thanks very much,, useful..
aschwynn
24-03-2010, 02:46 PM
:othanx......
Edmund Omolu
04-05-2010, 02:11 PM
Hi Gizzly,
Please kindly send me the your guide / hand to my email below;
edmundomolu@yahoo.com.
cc;edmund.omolu@nlng.com
ahmedamel78
12-05-2010, 03:59 PM
:) thank you
Kaiser
12-07-2010, 12:29 PM
Interesting read thanks!
supersuger
14-07-2010, 10:56 AM
thank for your book.
It is so useful ..
u are a good technical specialist.thank.
ntfreezer
17-07-2010, 02:52 PM
I can not connect the website, could you send me by email to me ,thanks. my email:liweijian@worldbase.cn
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.