Results 1 to 9 of 9
Thread: Stal vertical screw compressor
-
25-10-2010, 09:29 PM #1
Stal vertical screw compressor
Hi,
We have vertical screw compressor of model STAL MINI MK2 , we did not use the compressor for last 18 years, we want to run the compressor with R22.
When we started today it was taking 430 amps instead of 230 amps.Is it safe to run the compressor, with out damaging the motor and screws.
Also suggest us who can provide us the spare patrs for above model compressor.
-
26-10-2010, 05:50 PM #2
Re: Stal vertical screw compressor
how many hours of work it has? did you open the compressor, 18 years it is a lot of time !
-
29-10-2010, 06:48 AM #3
Re: Stal vertical screw compressor
You are certainly going to do damage.
No question!
Switch off and seek Help.
I hope you have a good fire Alarm system?
Grizzly
-
29-10-2010, 02:48 PM #4
Re: Stal vertical screw compressor
Not a single time run.
After running for 1 minute it is takimg normal amps.
Can you tell me spare parts suppliers for this compressor
-
29-10-2010, 02:58 PM #5
-
29-10-2010, 04:32 PM #6
Re: Stal vertical screw compressor
Coul dyou please tell me what preventive maintenance programme I have to follow for this STAL vertical screw compressor.
What type of break down problems I can anticipate on regular running of this compressor.
-
29-10-2010, 04:46 PM #7
Re: Stal vertical screw compressor
Apart from oil filter changes approx, every Year dependant upon hours run.
They are very very reliable.
Provided it is not being ran outside it's design parameters.
But you need a maintenance person to look after it.
(Monitor Oil Diff Pressure.)
I don't think Company Director qualifies, unless your business is refrigeration of course.
Grizzly
-
29-10-2010, 05:43 PM #8
Re: Stal vertical screw compressor
We want to make IQF fruits and vegetables.
Plant capacity is 1500 kgs per hour.
How do I calculate its refrigeration laod.
Say for Pineapple.
Tks
-
06-11-2010, 08:17 AM #9
Similar Threads
-
Screw compressor use R23
By hundred in forum Trouble ShootingReplies: 3Last Post: 26-05-2010, 04:02 AM -
problem with volume on frick screw compressor
By samlee12 in forum IndustrialReplies: 4Last Post: 29-10-2009, 06:06 AM -
Screw compressor performance
By faryuki in forum Industrial CompressorsReplies: 12Last Post: 17-12-2007, 03:50 AM -
Screw compressor vibration
By jpumarada in forum Industrial CompressorsReplies: 14Last Post: 26-04-2006, 01:43 PM -
screw compressor failure
By aygul in forum Trouble ShootingReplies: 23Last Post: 09-12-2004, 09:09 AM