Results 1 to 50 of 61
Thread: Compressor Pump Down
Hybrid View
-
20-02-2007, 11:05 AM #1
Re: Compressor Pump Down
Thanks Jon,
I appreciate the heads-up!
I'll add the following step to my procedure:
8a. Leak test the LP/HP fittings.
KETTLER
-
21-02-2007, 10:41 AM #2
-
21-02-2007, 11:51 AM #3
Re: Compressor Pump Down
Thanks Taz.
What's an "OFN"?
KETTLER
-
21-02-2007, 03:09 PM #4
-
01-03-2007, 12:52 AM #5
Re: Compressor Pump Down
Hello All,
The compressor pump down was a success! Thanks for your help.
KETTLER
-
01-03-2007, 09:00 AM #6
Re: Compressor Pump Down
You must be one of the most fortunate forum members who has scrapped through on the information supplied to carry out out a simple pumpdown on a compressor. Do yourself a favour and get some proper training in this trade, if you have a certificate it must have been done on your computer.
from the first post on the 14/02/07 its took you 16 days to carry out the procedure, you must also be fortunate to have the most understanding customer in the WORLD.
Lrac
-
15-07-2010, 10:02 PM #7
-
16-07-2010, 08:07 AM #8
Re: Compressor Pump Down
You're replying to a post of more than 3 years old
Don't forget that the mother tongue of many posters here isn't English
I bet you don't know what a ratelsleutel is.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.