Results 1 to 50 of 72

Hybrid View

  1. #1
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,630
    Rep Power
    34

    Re: charging R410a with no vacuum !!

    Quote Originally Posted by toprunner View Post
    Of course you put a filter in if you choose to flush it. Its a safer procedure than evacuate in cold weather.

    I can add that we teach all technicians here in sweden how to remove moisture below 15 degree in reasonable time, its a part of education. Your procedure is not sufficient.
    Outside temperature in the range of 10 to 30°C like you has nothing to do with removing moisture inside a system.
    Am I reading correct: do you (we) teach technicians?
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

  2. #2
    Join Date
    Aug 2001
    Location
    Sweden
    Age
    62
    Posts
    47
    Rep Power
    0

    Re: charging R410a with no vacuum !!

    Quote Originally Posted by Peter_1 View Post
    Outside temperature in the range of 10 to 30°C like you has nothing to do with removing moisture inside a system.
    Am I reading correct: do you (we) teach technicians?
    I told problem start at 15 degree and get worse with lower temperature. Where did you get 30 degree from?

    Check a diagram for boilingpoint of water and a IX-diagram for condensation if you dont understand what i talk about. (you obviously dont)

    Yes.. i teach technicians sometimes.

  3. #3
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,630
    Rep Power
    34

    Re: charging R410a with no vacuum !!

    Quote Originally Posted by toprunner View Post
    Yes.. i teach technicians sometimes.
    Hopefully not too many times.
    Answer my question once.
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

Similar Threads

  1. Vacuum Pump Questions
    By position1 in forum Fundamentals
    Replies: 7
    Last Post: 08-10-2009, 02:33 AM
  2. Vac Down Procedure.
    By mendoza in forum Fundamentals
    Replies: 3
    Last Post: 26-09-2009, 04:19 PM
  3. Troubleshooting a vacuum pump and gauge set.
    By Old Codger in forum Fundamentals
    Replies: 7
    Last Post: 08-08-2008, 05:13 PM
  4. inverters pulling vacuum
    By bangoman in forum Air Conditioning
    Replies: 2
    Last Post: 05-02-2008, 09:12 PM
  5. charging R410a
    By cikku in forum Refrigerants
    Replies: 25
    Last Post: 05-12-2005, 12:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •