Results 1 to 16 of 16
Thread: hi every body
Hybrid View
-
18-03-2008, 09:39 PM #1
Re: hi every body
hi dear sirs,
i have anew stranger problem in acold store room,this room working with danfous valve station, the problem start from about 2 weeks,the room temperature increases to -2 or -4C, i checked the valve station and i found that the main suction valve
(danfous PM1-65) have aproblem with opening but the solenoid valve working good, now i working with manual valve (sevice valve) and i canceled the danfous valve effect, now i need to check danfous valve but i cant because there is no service valve before the danfous valve
Similar Threads
-
Hello To Every Body
By m.javadinejad in forum New to REReplies: 5Last Post: 23-11-2007, 11:10 PM -
York J Body Windings
By GHAZ in forum Industrial CompressorsReplies: 2Last Post: 09-07-2007, 10:06 PM -
Any body got any tools lying around?
By cold as ice in forum Tools and CalculatorsReplies: 20Last Post: 20-10-2006, 07:26 AM -
Stainless Steel Filter Body
By Derek in forum IndustrialReplies: 2Last Post: 10-04-2003, 06:25 PM -
TEV with MOP: how to keep valve body temp above bulb temp?
By DaBit in forum FundamentalsReplies: 5Last Post: 16-10-2002, 12:38 AM