Results 1 to 10 of 10
Thread: help plz
-
12-03-2008, 07:41 PM #1
help plz
hi guys i am a student and i am making air cycle refrigeration system. and i got a compressor and i need help to calculate its volumetric flow rate plz any body help me
the compressor information is
Power: 0.25hp
model:- danfoss
S.n:-TL3B
8024928
plz that is all the data i got i need help
-
12-03-2008, 09:08 PM #2
Re: help plz
Kakato,
You will find all the information you need at www.danfoss.com.
If you search their site for "TL3" then you will be able to download the full spec, the TL3B is old, I believe, but the data you are after will be the same for the modern ones (-G / -F).
Happy hunting,
-
12-03-2008, 09:15 PM #3
Re: help plz
I think that the TL3B is actually a reference for the start relay or the Klixon from what I could find on their site, none of it was in English which didn't help me much
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
12-03-2008, 10:15 PM #4
Re: help plz
Well, the TL3 bit indicates a compressor with a 3.13 cm3 cylinder volume.... the rest I don't know...sorry
-
12-03-2008, 10:30 PM #5
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: help plz
This is what danfoss software have about TL3G 220V 50Hz:
http://www.mediafire.com/?y1mjemmt3cd
-
13-03-2008, 09:56 AM #6
Re: help plz
thanks peple put i oly need 2 know the rpm
-
13-03-2008, 10:49 AM #7
Re: help plz
Hmmm didn't racall the formula.
but it is some thing times hertz then divided by some thing.
-
13-03-2008, 10:59 AM #8
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
-
13-03-2008, 12:17 PM #9
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
-
13-03-2008, 12:52 PM #10
Re: help plz
thanks for help any way