Results 1 to 12 of 12
Thread: Software Required!
-
16-11-2006, 05:40 AM #1
Software Required!
Is there any software from which we can measure that how much huge refrigeration unit is required for the room
length n width and all dimesions of that room are given.
-
16-11-2006, 12:12 PM #2
Re: Software Required!
Yes, try Coolpack
http://www.et.web.mek.dtu.dk/Coolpack/UK/Last edited by Brian_UK; 16-11-2006 at 06:33 PM. Reason: Correct spelling of Coolpack and added link.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
16-11-2006, 06:31 PM #3
Re: Software Required!
Hi, Leosangel
Try to visit: http://www.luve.it
and see to download program "Refriger 2006" maybe you must send an email to them asking for CD with that program.
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
16-11-2006, 08:44 PM #4
Re: Software Required!
Leosangel,
Even if you use software, event then you have to know what you need to input in the boxes.
And you must be able to judge if the result is somehow in the region you expected.
Be carefull with software.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
18-11-2006, 04:42 AM #5
Re: Software Required!
Yes there are a number of softwares available for assessing the heat load for the refrigeration plant for a room. But you have to provide the necessary inputs. Merely by knowing the length, breadth and the height will not help. Coolpack is a good software and so is luve. Other than this you can directly download from www.russell.com and request for a software CD from www.heatcraftrpd.com . These are also useful selection software. If you visit the web site of Heatcraft as stated above, you can also get a chart for assessing the approximate heat load on the basis of the room dimension. But then that would not help you. For correct assessment you must have the necessary technical datas.
-
22-03-2007, 08:16 AM #6
Re: Software Required!
I think that Coolpack is a bit limited.
Only allows 4 walls, roof and floor.
What about freezer room with airlock?
Only 2 products?
No build in calculation for door infiltration.
You also have to enter the heat of respiration.
I suppose for a simple EES macro its not bad, but I wouldnt use it for commercial design.
The original work done by Morten at DTU and publuished in Delphi source code was much better. Pity it was withdrawn.
-
22-03-2007, 01:12 PM #7
Re: Software Required!
Hi, nh3simman
Not agree, it is unlimited because it is free ask other people here....
Originally Posted by nh3simman
Airlock chambers with curtains are normal for industrial cold stores today in use are high speed curtains the lost is minimal...Why we need separate calculation
It is possible to make calculation for more products but for each product separately, need more time, but...
Calculation for door infiltration for me is no need because we have so many loss due to moving good in and out of freezer - never ever there is a constant load many times less then calculated for room..
There are a lot of tables with heat of respiration values...
Originally Posted by nh3simman
I have Daikin software Hi-VRV SELECTION PROGRAM for commercial A/C and it is completely different and not comparative with CoolPack, but you can try this one also free
http://www.luve.it/EN/ -goto downloads- Refriger 2006 you must register
Originally Posted by nh3simman
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
08-03-2008, 03:34 PM #8
Re: Software Required!
Please I need the DAIKIN Software
-
09-03-2008, 12:46 AM #9
-
11-03-2008, 01:41 PM #10
Re: Software Required!
Thanks Brian
-
11-03-2008, 01:46 PM #11
Re: Software Required!
[quote=Josip;62522]Hi, nh3simman
I have Daikin software Hi-VRV SELECTION PROGRAM for commercial A/C
This What I need.
-
11-03-2008, 03:33 PM #12
Re: Software Required!
[quote=2007eng;96690]http://www.luve.it/EN/ -goto downloads- Refriger 2006 you must register