Results 1 to 3 of 3
Thread: receiver placement
-
06-03-2008, 07:11 PM #1
receiver placement
with 2 condensers in the parrallel system how far below should my receiver be ?
-
06-03-2008, 08:29 PM #2
Re: receiver placement
Hey Grant.Try and keep your reciever as close to your condensors as possible.If your condensor is located at the top,and reciever at the bottom,makes it easier for the liquid to flow downwards,instead of upwards.
I've seen systems work where the reciever is located a few meters above the condensor,but I would personally install the reciever no more than 2 meters below the condensors.Hope it helps,mate....
-
06-03-2008, 09:57 PM #3
Re: receiver placement
thanks sprngbok , thats what i thought
Similar Threads
-
Receiver! Needed or not
By The MG Pony in forum FundamentalsReplies: 4Last Post: 22-08-2007, 08:51 PM -
liquid receiver low level alarm
By racknovice in forum Supermarket RefrigerationReplies: 8Last Post: 18-08-2007, 06:53 PM -
Condenser outlet lower than receiver inlet.
By Pawel_Wisnik in forum Technical DiscussionsReplies: 7Last Post: 20-02-2007, 09:18 AM -
Receiver on a cap system??
By Abe in forum Trouble ShootingReplies: 9Last Post: 17-03-2003, 10:58 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM