Results 51 to 58 of 58
-
07-10-2007, 08:56 PM #51
Re: liquid overfeed system design guide
Originally Posted by Josip
Those are my priorities.
Refrigerants are as safe as the person working on the system. There are no SAFE refrigerants IMHO.
Lana, I suspect you have a new appreciation for industrial refrigeration after your research on liquid overfeed systems. I know this was one of the most interesting topics I have learned.
If all else fails, ask for help.
-
10-10-2007, 06:43 PM #52
-
14-11-2007, 01:45 PM #53
Re: liquid overfeed system design guide
Dear Friend,
ASHREA Refrigeration hand book can help you about it .
if didnot have contact me
amirjhanem@gmail.com
or
amir.ghanem@ salemyork.com
-
20-12-2007, 10:26 PM #54
Re: liquid overfeed system design guide
Hiya Lana, i work in a large Refrigerated depot with 3 seperate R22 overfeed systems doing +7c, +3c and -20c running on stal open drive recips. I've got some technical specs for design and sizing for surge drums from the 1970's which are really indepth. All run on a saturated design temp of +35c with single stage compression. Each compressor has an individual oil seperator plus an oil seperator in common discharge. If you need an info send me a post
-
02-03-2008, 04:04 AM #55
Re: liquid overfeed system design guide
Hallo to everybody:
There is an artical about the subject titled "Back to the Basics: What is the Right Liquid Feed Method for Your System? " puplished on IIAR, 2005, and written by Alan Simchick of Refrigeracion y Equipos, S.A. Mexico. I can emial it for you Lana if you send me your email. Of course US iceman got it.Last edited by aansari; 02-03-2008 at 04:13 AM.
-
02-03-2008, 07:00 AM #56
Re: liquid overfeed system design guide
Hello aansari,
Maybe some members like me are also interested on the Liquid Overfeed System. Would not it be better if you provide a link to the same in this forum, so that others may also view it.
-
03-03-2008, 11:54 AM #57
Re: liquid overfeed system design guide
Dear Samarjit:
The artical is more than 1.2 MG and I can not attach it, please send your emial to sant it to you.
-
03-03-2008, 02:16 PM #58
Re: liquid overfeed system design guide
Hello aansari,
Thanks for your offer. I tried to send you a PM stating my e mail, but could not do so as I was made to understand that either you have chosen not to recieve any PM or are not as yet authorised to recieve the same. Could I please request you to upload the same in www.yousendit.com and post the link in the forum in this thread.
Stating our e mail id on the post is not permitted. You may check my profile in the forum and send the mail.
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
System Burn Out Troubleshooting
By altaf22m in forum Technical DiscussionsReplies: 13Last Post: 07-05-2010, 09:24 AM -
Autocascade refrigeration system: design verification needed
By DaBit in forum Technical SpeculationsReplies: 3Last Post: 07-02-2010, 07:48 AM -
Parker levels in ammonia systems
By Friobernal in forum IndustrialReplies: 3Last Post: 04-08-2005, 03:46 PM