Mr Condenseddave,
Where have you seen a unit like I have described?
Who makes it?
What is a better way?
-----------------------------
Mr Gary,
You say move the EPR to a 'common line' with both evap & frost top, same line ??
-----------------------------
Sunday, The unit ran very well with temp setting of 26°F. and 34°F. for the air out temp. The frost top temp floated about 6°F., but this was not a problem, the media being tested kept at a controlled 33° to 36°. No Ice accumulated on evap coil!!!
The air out measurement is for reference, this is how 'they have always' measured the performance of an air over model.
Thanks guys,
Tom