Results 1 to 2 of 2
-
29-11-2007, 03:03 PM #1
"Annie" Analyzer MN A12 -120vac cord
I have the analyzer unit but an incomplete manual for it. I need instuctions for connecting to 240 vac to try freeing a 4hp stuck heat pump compressor. My current guess is to change the 120 vac plug to a 240 vac plug. Is that correct? What's next?
Tom E-mail removed by ModLast edited by frank; 29-11-2007 at 03:26 PM.
-
30-11-2007, 12:36 AM #2
Re: "Annie" Analyzer MN A12 -120vac cord
Hi Tom9 and welcome to the forum.
There has been some discussions on the ANiies in the past.
One thread -
http://www.refrigeration-engineer.co...ighlight=annie
Has a copy of the 240v model wiring diagram, maybe that will help you.
Personally I wouldn't think changing the plug will be a good idea, 120v in doesn't make 230v out.Brian - Newton Abbot, Devon, UK
Retired March 2015