Results 1 to 5 of 5
-
01-11-2007, 02:19 PM #1
I search of information about Frick Oil
Dear All
I search of information about Frick oil No.9 and No.3
spec. Heat Capactiy and Density
near 50°C and 90°C or 122°F and 194°F
In US or Europa unit of measure.
Thanks!Last edited by NH3-Coolman; 01-11-2007 at 02:28 PM.
-
01-11-2007, 02:33 PM #2
Frick Coolware
Dear All
I search of information about Frick Coolware V6.xx or V7.xx
I need this tool only 1 week.
Can I find this tool for free or trial (30 days).
-
01-11-2007, 03:14 PM #3
Re: Frick Coolware
Hi Herr NH3-Coolman,
Frick only allows specific companies to have this software. Anyone who has it, is registered with Frick. The users also have to promise not to release the software to any outside non-registered person/firm.
Sorry, Frick is very protective of the software.
What do you need?If all else fails, ask for help.
-
01-11-2007, 04:31 PM #4
Re: Frick Coolware
Hi US Iceman
How are you?
I has fear it, this it so is.
You can need certainly introducing yourself for what do I need it. still the same problem (2. Round).
I found few inconsistencies in the data print “from Frick Coolware V6.xx” it we of Frick got, I wanted to check this.
With my calculations comes I on other values, the heat balance is not Ok and more!
I nead a new data print “from Frick Coolware V7.xx for our compressor (guarantee).
BR! NH3-Coolman
-
01-11-2007, 07:29 PM #5
Re: I search of information about Frick
Hi ,
I'm fine and I already thought it was the same problem you have been fighting with. I also saw your post for oil properties and suspected it was for the same project.
I'm trying to get the new password for my copy of version 7.1.1. As soon as I get this I will send you an email.
Best regards,
US IcemanIf all else fails, ask for help.
Similar Threads
-
Frick RTM120SEB8 vibration concern
By evapcoil in forum Industrial CompressorsReplies: 13Last Post: 29-07-2009, 08:15 AM -
Defrost information needed
By church2k in forum System OptimizationReplies: 6Last Post: 04-06-2007, 04:04 AM -
old frick system monitor
By rasgrant in forum NH3Replies: 5Last Post: 17-01-2007, 06:15 PM -
auxiliary components information
By mohamed khamis in forum Tools and CalculatorsReplies: 2Last Post: 27-04-2006, 01:20 PM -
Information on Hussmann enviropacks
By tonydeith in forum Supermarket RefrigerationReplies: 0Last Post: 25-04-2006, 01:22 PM