Results 1 to 14 of 14
Thread: Ductulator
-
09-03-2006, 03:15 AM #1
Ductulator
I URGENTLY NEED A SITE WHERE A DUCTULATOR OR JUST ANY SOFTWARE TO CALCULATE DUCTINGH SYSTEM-
Regards
-
09-03-2006, 05:59 AM #2
Re: Ductulator
hi dear
try these sites
www.ductmate.com
http://coolit.co.za
www.psychrometric.com
www.warmair.com
www.energy.ca.gov
www.toolbase.org
www.airah.org.au
www.smacna.org
www.connel.net
good luck
faithfully
afeef
-
15-06-2006, 09:22 AM #3
Re: Ductulator
HI pravin check this Small Softwere,,
Regards
-
19-10-2007, 10:40 PM #4
-
20-10-2007, 03:38 AM #5
Re: Ductulator
-
31-01-2009, 10:30 PM #6
Re: Ductulator
I Have a 5 ton trane heat pump with a 42 foot run of duct. The duct starts as a 24x10 for 6 feet, then reduces to 20x8 for 12 feet then 16x8 for 18 feet and then 12x8 for 6 feet. The rooms in the house are all fed from this main duct line and are 5" round ducts. Any thoughts?
-
31-01-2009, 10:53 PM #7
Re: Ductulator
First thought, perhaps you should start your own thread.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
01-02-2009, 05:07 PM #8
-
04-03-2010, 10:35 PM #9
-
05-03-2010, 04:46 PM #10
Re: Ductulator
send me your email, i will post it there
-
17-03-2010, 02:49 AM #11
it did not run on my pc please teach me how. this my e-mail add: ginx1985@yahoo.com
thanksLast edited by chillin out; 23-03-2010 at 09:47 PM.
-
11-05-2010, 07:17 PM #12
Re: Ductulator
Just download the zip file that MANIS posted, unzip, and run the program, if you cannot run the program because of vbrun300.dll error, it is because you don't have that file in your windows installation. In order to fix it, you must download vbrun300.dll file from the site dll-files.com and unzip the file on the c:\WINDOWS\System and now you can run the program!!
@MANIS Thanks for the program!
-
09-12-2010, 05:36 AM #13
Re: Ductulator
Hi Manis
file wouldnt run on mi PC, could you send it at alvarosyp@yahoo.com
Thank you
-
25-04-2011, 04:51 AM #14
Re: Ductulator
Thanks for the freebie