Results 1 to 7 of 7
Thread: New coil
-
12-09-2006, 08:34 AM #1
New coil
It was just delivered to us. It looked suspicious since it was unloaded from the truck. Bad looking repair with a brazed curve on the fork side.
In fact. It leaks hopelesslyLast edited by NoNickName; 21-03-2008 at 03:22 PM.
-
12-09-2006, 06:04 PM #2
Re: New coil
Definately looks like a poor solder job. Do you know if these were hand soldered or was the coil oven brazed?
Ken
-
12-09-2006, 09:12 PM #3
Re: New coil
They were forks on that side, but then cut and weld by hand for repairing. Poor repairing.
-
12-01-2010, 09:40 PM #4
-
12-01-2010, 10:57 PM #5
-
12-01-2010, 11:24 PM #6
Re: New coil
Yeah, they did seem a little limited in variety in their postings, takes all sorts to make a world i guess
-
13-01-2010, 07:31 AM #7
Re: New coil
Yeah, he revived a 4 years old thread of mine, I didn't even remember what it was about.