Results 1 to 11 of 11
Thread: Samsung Error codes
Threaded View
-
16-08-2006, 08:54 PM #8
Re: Samsung Error codes
Hi Hope these help......
Trouble shooting by outdoor unit error
[b]Error Error Description Check Code[/b]
1 Indoor unit room thermistor Indoor PCB/
Thermistor
5 Indoor unit pipe sensor Indoor PCB/
Sensor
6 Outdoor thermistor/sensor Outdoor PCB/
Sensor
9 Float switch error Drain pump/float
Drain system
DIP switch SW2 of the indoor unit (the 2 and 4 switches must be on)
A communication error indoor/ Inter connect
Outdoor cable
PCB of indoor/
outdoor
C Wired remote comms error Remote controller/
Cable
Main/Sub PCB of
Indoor unit
D Outdoor pipe sensor Outdoor pipe sens
Outdoor PCB
L Three phase power error Incoming supply
( 3 Phase models only) Outdoor PCB
Sorry if this is a bit confusing as far as i can remember the outdoor unit has got a fault indicator on the PCB and the codes above relate to that. The error codes have a two digit format with the first digit indicating the unit address and the second the error code.
Hope this is some help.... Most of the above tend to point to faulty outdoor PCB's as the cause of most faults.
Regards
Ian NeillLast edited by frank; 18-08-2006 at 09:34 PM.
Similar Threads
-
Samsung Error codes
By kevscontent in forum FundamentalsReplies: 2Last Post: 04-04-2011, 08:08 AM -
samsung
By superswill in forum Trouble ShootingReplies: 4Last Post: 20-07-2006, 09:20 PM -
Leaky Samsung...
By charliepad in forum DomesticReplies: 4Last Post: 08-07-2006, 12:54 AM -
Samsung Domestic nightmare
By andre_fridge in forum DomesticReplies: 7Last Post: 31-05-2006, 10:48 PM -
Anyone tried Samsung yet ?
By eggs in forum Chit Chat & Service StoriesReplies: 16Last Post: 27-09-2004, 10:58 PM