Results 1 to 50 of 96
Threaded View
-
15-04-2002, 09:09 PM #11So..... I'm going to fit an additional receiver, re-employ the evap fan motors that I disabled, and I'm going to stop worrying about everything else!
You may (or may not) find that the system has humidity problems, because the slightly undersized CU gives it a higher ADP. If this is the case, the best solution might be new fan blades with a little less pitch. Which means you were right in the first place.
On the other hand, the longer run time (more time to de-humidify) may make up for it.Last edited by Gary; 15-04-2002 at 09:40 PM.
Similar Threads
-
walk in freezer refrigeration sizing?
By trammd in forum Technical DiscussionsReplies: 10Last Post: 02-11-2006, 11:56 AM -
Optimum temp in 5 door freezer
By Joe Painting in forum CommercialReplies: 3Last Post: 03-06-2006, 07:20 AM -
5 door reach in freezer top 2 shelves are warm
By mickey47 in forum Supermarket RefrigerationReplies: 3Last Post: 28-08-2005, 05:28 PM -
freezer is now a cooler
By superheat in forum CommercialReplies: 20Last Post: 18-03-2003, 12:32 PM -
single door reach in freezer
By bernie in forum CommercialReplies: 12Last Post: 15-06-2001, 10:27 PM