Results 1 to 27 of 27
Thread: Nh3 systems
-
12-03-2006, 07:47 PM #1
Nh3 systems
I am looking for information on Nh3 systems . I work at a soft drink company and would like to understand the refrigeration system on our fillers. We have 10 Vilter compressors that range from 25 hp to 125 hp that feed three chillers in the filler room. next to each chiller appears to be a liquid reciever just before the metering device
thats about the extent of my knowlege and I cant find anything in my refrigeration books from school
thanks
-
12-03-2006, 08:13 PM #2
Re: Nh3 systems
Hi CT2
Would these be "MO JO Plants
Mojourney plants, built in the good old USA for syrup cooling.
If they are I will explain their operation.
Kind Regards. Andy
-
12-03-2006, 08:37 PM #3
Re: Nh3 systems
Andy , thanks for the reply
yes , the system cools the mix , it is then pumped into the filler where the mix and co2 are filled into the container
-
12-03-2006, 08:51 PM #4
Re: Nh3 systems
Hi CT2
A simple flooded NH3 system.
liquid is feed from the receiver out side. This HP liquid is injected into the Surge vessel inside thru an injector nozzel, this causes circulation of the ammonia in the Surup cooling jacket the liquid entering goes to the top of the jacket, sucking cold Ammonia from the bottom of the Jacket and mixing it to the incomming ammonia by venturi effect. The charge is resonably critical in these systems, as is the condensing temperture and the opening degrees of the injector valve, all effect the proper circulation in the jacket.
Hope this helps
Kind Regards. Andy
-
12-03-2006, 10:38 PM #5
Re: Nh3 systems
so if I understand you correctly the ammonia doesnt actually vaporize ,it remains in a liquid or saturated vapor in the chiller
does the ammonia vaporize in the system or do the compressors pump liquid?/ saturated vapor?
-
12-03-2006, 10:45 PM #6
Re: Nh3 systems
how do you determine if the charge is correct. I understand that occasionally ammonia has to be added to the system. On each of the Surge vessels there is a sight glass and I have watched the level changing during operation
-
12-03-2006, 10:46 PM #7
Re: Nh3 systems
please excuse my little knowlege on these systems , I would like to learn as much as I can about them
-
16-03-2006, 01:00 PM #8
Re: Nh3 systems
Hi CT2,
I used to work in coca-cola, and now I am a contractor of their refrigeration. Most of the system is carbo cooler MO JO. What company are you working? eric
-
16-03-2006, 01:24 PM #9
Re: Nh3 systems
Hi CT2,
so if I understand you correctly the ammonia doesn't actually vaporize ,it remains in a liquid or saturated vapor in the chiller
does the ammonia vaporize in the system or do the compressors pump liquid?/ saturated vapor?
I do not have any literature for the systems you have, but you may be able to find some information by doing a an internet search.
If I can find some information for you, I will post it here.
Please ask any questions you may have. We are glad to help.
-
16-03-2006, 08:41 PM #10
Re: Nh3 systems
Originally Posted by CT2
Kind Regards. Andy
-
16-03-2006, 08:44 PM #11
Re: Nh3 systems
Originally Posted by CT2
Suction superheat is also required
Level is important
Also the product leaving temperature, the operator will have a good idea if the plant is cooling to it,s usualy standard.
Kind Regards Andy
-
23-03-2006, 04:23 AM #12
Re: Nh3 systems
Andy , Guappo and us iceman
thank you all for your help
Guappo , I am working at the 7-up bottleing co of San Franscico
Us Iceman: I have tried several google searches on nh3 refrigeration and havent found anything that teaches plant systems . I work on night shift and unfortunatly the journeymen working day shift know the most about our system and are willing to share the least with the rest of us
we had a case the other night in which our product temps rose to 60 degrees F and thankfully with my limited knowlege of our system I was able to find the trouble and make the correction
-
23-03-2006, 01:43 PM #13
Re: Nh3 systems
CT2, try searching on the RETA website.
http://www.reta.com
They will not have instructional material listed you can read, but you can order the industrial refrigeration books. Most of the information you need is within the first two volumes.
Yes it will cost you some money, but you WILL get some very good information on the basic systems.
...the journeymen working day shift know the most about our system and are willing to share the least with the rest of us
I found this to be true when I started. I also used the RETA books at that time because they were the ONLY source of information available. Other than contractors or manufacturers who will help, but usually only when you are spending money!
-
23-03-2006, 05:10 PM #14
Re: Nh3 systems
US iceman : thank you I will look at the sites you have mentioned . I dont mind spending money on books that will make money for me in the long run
-
28-03-2006, 09:12 PM #15
Re: Nh3 systems
You can go to reta. com and get a order form and order refrigeration books. Its cheaper if you become a member. You can order the books and the exam and answer sheet and mail the answer sheet in to reta and they will give you a certificate. My company paid for my as part of training. I have recently completed Ref. course 1-2-3-4. Bacic electricty 1-2 and Control theory 1-2. hope this helps and good luck.
-
28-03-2006, 09:29 PM #16
Re: Nh3 systems
Ken,
Have you taken the CARO or CIRO certification exams?
What did you think of the training material and books?
Thanks,
US Iceman
-
28-03-2006, 09:51 PM #17
Re: Nh3 systems
Hellow US Iceman. No I have not taken the CARO or CIRO exams yet my employer told me if I wanted to take them they would pay for it so I will probably check in to in later. I found the books to be very useful Ref. 1-2-3-4- and basic Electyicty 1 and 2 However I found Control Theory 1-2 to be boring and a little to advanced for me at this time. I highly recommend Ref. books 1-2-3 and 4 for anyone starting out in NH3. Ref.
-
28-03-2006, 09:57 PM #18
Re: Nh3 systems
Book 3 is currently undergoing revision at this time.
I also seem to remember hearing something about another book being revised, but I don't remember which one it is.
If your employer will pay for the certification exams you are a lucky one. Some employers are beginning to take this seriously, others are waiting for it to be free I think.
-
29-03-2006, 06:54 AM #19
Re: Nh3 systems
Hi,CT2.I am a new too.but I have read a book,maybe help you.The name is "Industrial Refrigeration HandBook".Mc Graw Hill published.
-
03-05-2006, 07:07 PM #20
Re: Nh3 systems
Guapo , Iceman and Andy
well I got a bit of an education on our system and I walked away with a better understanding of how things work and what does what.
we have three frame and plate chillers and one of them leaked product.
only one of the mechanics there had any idea how this was assembled and that was years ago. he only remembered the factory rep putting it together.
we took it apart and changed the gaskets on all of the plates and put it together 4 times , still chasing the leak when someone remembered that we had three plates in stock from the installation.
after replacing the end plate and two additional plates we stopped the leak.
I evacuated the system on my shift, I should say the isolated part of the system, found a small ammonia leak with a smoke stick , fixed that leak , evacuated again and after holding 30 " of vacuum we put it back in operation
I do thank you all for your help, anthony
-
03-05-2006, 07:19 PM #21
Re: Nh3 systems
When you say a "smoke stick" I am assuming you are using sulphur sticks??
Don't they smell nice.
-
04-05-2006, 09:41 AM #22
Re: Nh3 systems
yes, sulphur sticks
yea , when you hit a leak I dont know what is worse , the ammonia or the smoke from the sticks
-
04-05-2006, 12:51 PM #23
Re: Nh3 systems
Originally Posted by CT2
but definitely it is 100% proved that you have a leak then you have a break (for beer) waiting for fresh air
Best regards,
Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
04-05-2006, 01:10 PM #24
Re: Nh3 systems
Originally Posted by CT2
-
04-05-2006, 01:21 PM #25
Re: Nh3 systems
All the compressors compress low temperature low pressure vapour not liquid.If the liquid enters into the compressor chamber it is called liquid stroke which is very fatal for the machine.
AMARNATH JHA
-
04-05-2006, 01:41 PM #26
Re: Nh3 systems
Originally Posted by AMARNATH JHA
yes, definitely must be vapour, but not necessarily low temp and low press
to pump liquids we use pumps not compressors,
it is dangerous causing damages but not fatal for all compressors
Best regards,
Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
15-05-2006, 07:06 PM #27
Re: Nh3 systems
I am mostly familiar with refrigeration compressors and I
I wasnt there to see them draw the liquid out of the chillers reciever , but I was there when we slowly throttled liquid back in the tank, and that gave me a better understanding of what was taking place in the system
Similar Threads
-
contaminants in ammonia systems
By Johnny Rod in forum RefrigerantsReplies: 29Last Post: 17-10-2011, 05:26 PM -
My local Apprentice Training Classes
By shogun7 in forum TrainingReplies: 12Last Post: 17-03-2007, 03:10 PM -
Refrigeration alarm systems
By tonydeith in forum Supermarket RefrigerationReplies: 19Last Post: 27-04-2006, 01:43 AM -
HFCs for flooded systems?
By garyb in forum RefrigerantsReplies: 15Last Post: 21-04-2006, 10:02 PM -
Diy Systems
By kewlman in forum Air ConditioningReplies: 7Last Post: 22-07-2005, 01:08 AM