Results 1 to 50 of 72
Thread: Engineering problem? Hmmmmm
Threaded View
-
14-03-2002, 04:33 PM #11Originally posted by Fridgetech
A reduced SHF will tend to increase LMTD for a given TD by reducing dt i.e. raising leaving temperature.
But wouldn't the (properly applied) TEV's (possible) reserve capacity allow such a scenario (maintaining SH) up to the point that the unit cooler drop in T.D. would become "static" when having exceeded the range of the (expansion device)?
The system is going to balance. The whole LOT cannot simply drop, unless something is broken. Right?Last edited by herefishy; 14-03-2002 at 04:40 PM.
Similar Threads
-
York Screw Oil Problem
By tomt in forum Technical DiscussionsReplies: 10Last Post: 02-12-2009, 02:48 PM -
what's the problem
By botrous in forum Air ConditioningReplies: 35Last Post: 22-06-2008, 02:54 AM -
Strange problem
By Peter_1 in forum ElectricalReplies: 9Last Post: 10-04-2007, 05:19 PM -
Condensation Problem At Door to Freezers
By mmarch in forum Air ConditioningReplies: 5Last Post: 17-10-2005, 02:42 PM -
Problem with centrif - help requested
By Brian_UK in forum Industrial CompressorsReplies: 5Last Post: 03-08-2005, 10:31 PM