Results 1 to 4 of 4
Thread: Samsung E201 Error Help
-
12-10-2023, 02:37 PM #1
Samsung E201 Error Help
Require some help with a U200 E201 fault on a Samsung DVM S2.
Outdoor Unit Model: AM140AXVGGR/EU.
Indoor Unit Model: AM071ANMPKH/EU.
I have 6 indoor units and 1 branch box connected to the system.
The outdoor unit as been programmed to 6 indoor connected and cycles through the address on the segment display.
Error occurs about 5 mins of operation.
Checked power supply to all indoor units and checked interconnecting voltage.
No visible signs of damage to cable either.
Have noticed that LED 302 is lit on 3 of the units. Unable to find any info on the function of this LED.
Any help would be appreciated.
-
23-10-2023, 12:24 PM #2
-
28-10-2023, 09:11 AM #3
Re: Samsung E201 Error Help
try this method (on picture),or use s net pro 2 and try to identify which one indoor unit is not communicating(probably bad board)
Snimka zaslona (146).png
-
28-10-2023, 10:05 AM #4
Re: Samsung E201 Error Help
if you donīt have converter and software for samsung read this thread
https://www.refrigeration-engineer.c...it-RJ060F3HXEA