Results 1 to 25 of 25
Thread: Hall HSO 6231
Threaded View
-
Re: Hall HSO 6231
It's an RSW system, and no ICS/pm between discharge and condenser, so it starts with 15C water in the tanks and on the condenser.
The diff pressure wasn't there until max slide and around 3000 rpm I believe.
The oil filter is fine once the oil pump shuts off and has a 0.1bar diff, so I left it in.
the reason you are seeing the oil filter diff is because it's calculated from the erratic sensor
Hansen valve was probably full open trying to get rid of the excess oil since the internal valve was fully closed, or so I believe-Cheers-
Tycho