Results 1 to 8 of 8
Thread: Frick SGC Service manual
-
07-11-2021, 02:01 PM #1
Frick SGC Service manual
Dear Collegues!
Could you sent me service manual for Frick SGC type compressor or release information about values axial gap of thrust bearing assemblies SGC 2321. I'll repair SGC 2321 first time, I was repaired TDSH 233 several year ago, but SGC has difference from TDSH. I can help with GEA Grasso screws! Thanks! My e-mail: sorokin.e.w@gmail.com
-
15-11-2021, 11:40 AM #2
Re: Frick SGC Service manual
Hi Zeleman,
welcome to RE forums ....
check your email ....
Best regrds, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
15-11-2021, 12:39 PM #3
Re: Frick SGC Service manual
Dear Josip,
Thank you very much for the information!
And thank you very much Geoff very helpful information!
-
24-11-2021, 11:36 PM #4
Re: Frick SGC Service manual
Zeleman SGC its same compressor like TDSH or other like GRAM,SABROE,etc.
So its same gap on other comp. from Frick production.
So you can use also on YCCH comp. because its a same ****t.
By the why you dont need to ask help because all off this its same compressor.
regards
Aki
-
27-11-2021, 06:30 PM #5
Re: Frick SGC Service manual
Hi Aki,
Thank you for reply and information,
With best regards,
Evgeny
-
30-03-2022, 02:05 PM #6
Re: Frick SGC Service manual
Dear Zeleman
Could you please sent me the service manual for the FRICK TDSH 233 the model is YCCH233L.
It is my first time try to overhauled this model, similar with the previous that i did but i need the service manual i only have the operation manual
Thank you in advance.Last edited by coolpower; 30-03-2022 at 02:16 PM.
-
08-05-2022, 04:19 PM #7
Re: Frick SGC Service manual
Dearest Josip is possible receive manual for a Gram GSV 64 960
Work shop manual for maintenance and if you have all clearances.
My best RGRDS
Andrea
andrea.rivieccio@lsigroup.it
-
27-05-2022, 02:49 PM #8
Re: Frick SGC Service manual
Ciao Andrea,
sorry, have been busy and not on RE forums for some time ...
Gram GSV 64 is Frick TDSH 163 ... and later SGC 163
but not sure ... hope some other guys here will confirm that
https://www.screwcompressorsspeciali...ompressor.html
I have to find manual of TDSH 163 and send to you.
Best regards, JosipLast edited by Josip; 27-05-2022 at 03:23 PM.
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.