Results 1 to 19 of 19
Thread: Grasso M-1 oil pressure
Threaded View
-
13-02-2018, 08:23 PM #12
Re: Grasso M-1 oil pressure
Josip,
This machine is differential oil pressure feed & pump driven by compressor that supplies 6 bar oil pressure for capacity control only.
Excess oil pressure from pump returns into differential oil pressure circuit.
Cricri simply replied to my statement that strainer behind unload block not used anymore.
This machine has roller bearings no doubt with orifice in oil channels.
Maldonado spring to unload if machine stops loaded.Last edited by RANGER1; 13-02-2018 at 08:27 PM.