Results 1 to 10 of 10
Thread: Aerzen Screw Compressor VM 45
-
07-01-2017, 04:58 PM #1
Aerzen Screw Compressor VM 45
Hi Every Body;
I need Compressor clearances For Aerzen Vm 45 (For bearing play and Between screws and inside surface of compressor).
Help Me Please
Thanks
-
08-01-2017, 07:50 AM #2
Re: Aerzen Screw Compressor VM 45
Hi,I can help you with this.
-
10-01-2017, 11:49 AM #3
Re: Aerzen Screw Compressor VM 45
Hi AKI,Can You Tell me Please?I am Waiting.Thanks
Last edited by anozary; 10-01-2017 at 11:57 AM.
-
10-01-2017, 11:49 AM #4
-
10-01-2017, 12:05 PM #5
Re: Aerzen Screw Compressor VM 45
Can you send me by email.
anozary@gmail.com
Thanks Very Much
-
10-01-2017, 02:28 PM #6
Re: Aerzen Screw Compressor VM 45
Can you tell me type of comp.
Exmaple;VMY 236 or similar VMY 436 mk1,mk2,mk2.5
b.regards
Aki
-
10-01-2017, 05:14 PM #7
-
10-01-2017, 11:55 PM #8
Re: Aerzen Screw Compressor VM 45
Hi, anozary
welcome to RE forums ...
Those types of compressors are not refrigeration types and technical documentation is not easy to get ...
please try the link below ... hope to be of some help...
http://www.hccorp.kr/down/Screw%20Co...or_General.pdf
http://www.parsvacuum.com/PortalData...ML)%20(FA).pdf
http://www.parsvacuum.com/PortalData...ld)%20(EN).pdf
here you can check some documentation available under "download"
http://www.thomasnet.com/catalogs/it...w-compressors/
Best regards, JosipLast edited by Josip; 11-01-2017 at 12:11 AM. Reason: add link
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
11-01-2017, 07:38 AM #9
Re: Aerzen Screw Compressor VM 45
Sorry,my mistake.
I was thinking that is ref.compressor.
best regards
-
11-01-2017, 02:24 PM #10