Results 1 to 6 of 6
-
18-11-2014, 02:16 PM #1
How to reset/clear on error code on PAR-21MAA Remote Control after replace drain pump
Hi there can anyone here help in advising on how to clear the error code on the wired controller
-
18-11-2014, 02:23 PM #2
Re: How to reset/clear on error code on PAR-21MAA Remote Control after replace drain
This is for the Mitsubishi VRF air-con
-
18-11-2014, 02:26 PM #3
Re: How to reset/clear on error code on PAR-21MAA Remote Control after replace drain
The Fan coil is PLFY50
-
18-11-2014, 09:17 PM #4
Re: How to reset/clear on error code on PAR-21MAA Remote Control after replace drain
Has the fault been repaired ?
Reset is via the self check history display.
www.mitsubishielectric.com.au/assets/leg/par-21maa.pdf
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
05-01-2015, 02:47 PM #5
Re: How to reset/clear on error code on PAR-21MAA Remote Control after replace drain
Hi Mr Brian, in the shortest and most straight-forward approach method. Is it by depressing the "On/Off" button twice and press start button. From there it should clear up on the last error code on the display. This was taught by one of my co-worker.
Kind Regards,
Tim
-
05-01-2015, 09:50 PM #6
Re: How to reset/clear on error code on PAR-21MAA Remote Control after replace drain
press check button twice to display the fault code, press clock on/off button twice quickly to clear after when the fault has been rectified
Last edited by install monkey; 05-01-2015 at 09:51 PM. Reason: ps theres no start button on a par 21