Results 1 to 12 of 12
Thread: Close Control but no heat load
-
14-12-2013, 01:02 PM #1
Close Control but no heat load
I'm looking at quoting a small room (27m2, 3m ceiling) which requires conditions of 21-24degC and 45-55% RH.
The only heat loads are 2/3 personnel, pc's (the usual office kit) and some solar gain in the summer. Throughout the winter they will require heating and humidification.
(I've worked out the cooling load at 3.3kw/heating load 3.4kw)
Can anyone recommend a close control system for this application? (cool/heat/dehum+reheat/humidify) Been looking into Airedale but just wanted to see if there's anything else.
-
14-12-2013, 08:56 PM #2
Re: Close Control but no heat load
Have you tried Eaton Williams?
http://eaton-williams.com/company/co...d_solution.phpBrian - Newton Abbot, Devon, UK
Retired March 2015
-
19-12-2013, 08:56 AM #3
-
19-12-2013, 11:15 PM #4
Re: Close Control but no heat load
daikin ururu sarara is a very feeble excuse for close control- the controller will only let you set a hi med low humidity range- and it relies on outdoor air to provide the moisture- good for domestic use but you need to go to denco,airedale,eaton williams or other similar brands
-
20-12-2013, 08:33 AM #5
-
22-12-2013, 07:55 PM #6
Re: Close Control but no heat load
i would recommend the GEA Heat Exchanger Multi-Denco system.......but then....I would!
-
18-01-2014, 11:20 PM #7
Re: Close Control but no heat load
are the airedale units electric heating only or do they make heat pumps?
-
19-01-2014, 12:51 AM #8
Re: Close Control but no heat load
airedale now do carbon heating- with real flame effect- check the office in leeds! scorchio! haha
-
19-01-2014, 08:23 AM #9
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Close Control but no heat load
Check these:
http://www.hiref.it/en/telecom/hts
-
19-01-2014, 02:40 PM #10
-
20-01-2014, 07:56 AM #11
Re: Close Control but no heat load
Let us look at HiRef but on NRG series
http://www.hiref.it/images/stories/B...G_en_ru_de.pdfLast edited by bigor_2; 20-01-2014 at 08:12 AM.
-
21-01-2014, 03:14 PM #12
Re: Close Control but no heat load
Stulz do a 5kW system.