Results 1 to 5 of 5
Thread: mitsi highwall cover replacement
-
16-01-2014, 06:25 PM #1
mitsi highwall cover replacement
I've been repositioning some ac units one of which is a Mitsubishi electric highwall unit....it's an old r22 unit, model:- pkg-2fkha1. When the unit was taken down some dumb ass on site took it upon themselves to throw it on the scrap pile when I wasn't there, knowing full well it was to go back up and so has cracked most of the grill slats and several are completely missing. I was wondering if anyone knows if there is another unit which the cover would fit as a replacement as this cover is now obsolete, I know I'm clutching at straws here but was hoping someone may have been in a similar position and managed to find a replacement. It doesn't necessarily have to be the same design so long as it would fit to the old style back cover.
-
16-01-2014, 07:14 PM #2
Re: mitsi highwall cover replacement
kooltech do have some stock of old spares, otherwise any old bp stations- they all had mitsi's in em
-
16-01-2014, 07:32 PM #3
Re: mitsi highwall cover replacement
I was looking on kooltech site earlier today, I'll have to have another look. I wasn't sure if there was a newer version mitsi with same dimensions etc which would fit.
-
16-01-2014, 08:18 PM #4
Re: mitsi highwall cover replacement
http://www.mediafire.com/view/rx1wqhoq62uzvr8/OC015.PDF
click on link for service manual -contains part numbers for bits
-
16-01-2014, 08:22 PM #5
Re: mitsi highwall cover replacement
http://www.mediafire.com/view/28pxbw...20(OCH491).pdf
new manual
dont have 2 way outlets