Results 1 to 5 of 5
Thread: Sanyo E 06 fault code ??
-
17-12-2013, 08:45 PM #1
Sanyo E 06 fault code ??
Hi guys ... Got a Sanyo Vrf system , 10 indoors all with own controllers . Customer has informed me that they have workers in putting new walls in and removing other walls , one of their wall mounts needs removing , which im due to do however they have an E 06 fault on all the controllers,
eg ...... 1- 5 E 06
R.C No.
Any guidance would be great as I'm due on site 2moz to investigate further .
Cheers
Colin
-
17-12-2013, 09:12 PM #2
Re: Sanyo E 06 fault code ??
Outdoor unit is detecting error
signal from indoor unit.
Error in receiving serial communication signal.
There is an indoor unit which does not send signals when
the power is ON.
•
• E06
-
17-12-2013, 09:13 PM #3
Re: Sanyo E 06 fault code ??
check all the spurs on indoor units- ensure no ring main circuit isolated, check for cut comms cable, inspect each indoor pcb for lil red led
-
17-12-2013, 09:56 PM #4
Re: Sanyo E 06 fault code ??
Thanks , I'm expecting to get there and unit I'm due to move will have its power dis connected so that would explain it , fingers crossed its that simple !!
-
17-12-2013, 10:03 PM #5
Re: Sanyo E 06 fault code ??
I Had this fault a couple of weeks ago and a indoor unit was isolated at spur.