k20 Ignis Blizzard icemaker issue with not starting

[xbox40489]

run the ice machine with no water in, to see if the thickness stat finally cuts out- if it does then u need to check your gas pressures

I think I did that in the past.

It will not cut out as you would expect.

But I will try it and let you know.

[xbox40489]

I ran the machine for 30 min straight without any water I emptied the tank of water.

It also turned the dial on the ice thickness thermostat. To see if it will click.

Nothing happened. So that does not trigger the harvest mode either.

I think I did that in the past.

It will not cut out as you would expect.

But I will try it and let you know.