Results 1 to 16 of 16
Thread: ofn regulator
-
07-03-2013, 09:25 PM #1
ofn regulator
left standing next to new ac units did not even secure the cylinder must of been a good pressure test
-
07-03-2013, 09:32 PM #2
Re: ofn regulator
you get to see allsorts in this trade- saves breakin the dials on a regulator when the bottle falls over
-
07-03-2013, 09:36 PM #3
Re: ofn regulator
Suicide fitting...
Mostly found in Oxfordshire, UK :)
-
07-03-2013, 09:39 PM #4
Re: ofn regulator
3000 bar inlet pressure on a full bottle of nitro, copper pipe rated at 50-60 bar
-
07-03-2013, 10:28 PM #5
Re: ofn regulator
Looks like the copper has swelled out a bit...
Mostly found in Oxfordshire, UK :)
-
08-03-2013, 12:42 AM #6
Re: ofn regulator
quick question,why not lay a nitro bottle down saves breaking guages,on this fitting to the bottle insane!!!! whoever made that needs help/advice quick.
-
08-03-2013, 06:18 AM #7
Re: ofn regulator
if your going to use a fitting like that then your not going to worry about laying the bottle down the person using it was not even on site
-
08-03-2013, 04:48 PM #8
-
08-03-2013, 09:31 PM #9
Re: ofn regulator
take it off and cut it up you may save someones life!
-
09-03-2013, 05:22 PM #10
Re: ofn regulator
chemi-cool so what about the service manifold the cylinder was connected to or the ac system that was pressure tested or the people in the area of the test
-
09-03-2013, 05:27 PM #11
-
09-03-2013, 05:33 PM #12
Re: ofn regulator
chemi-cool so what about the service manifold the cylinder was connected to or the ac system that was pressure tested or the people in the area of the test
-
09-03-2013, 05:38 PM #13
Re: ofn regulator
gaugelines rated for 60 bar- manifolds- if used- weekest point would be the sight glass of the manifold .also the system is only designed for pressure test of around 40-42 bar- transducer/pressure switches would req testing to ensure still accurate!
-
09-03-2013, 09:02 PM #14
Re: ofn regulator
I work a lot with high pressure gases up to 400Bar in 50 liters bottles, there are about 8m3 gas in such a bottle, the pressure + the high velocity can cut you in two instantly. Accidents have heppened.
Who ever work like that should be jailed and loose his license for ever.
-
10-03-2013, 12:10 AM #15
Re: ofn regulator
The person who did this must of been desperate to pressure test but did not have a reg with them. i am sure a safer way to test the system if this is a install and not a gas leak. Would to vac out the system with a vaccy stat ( unsure of the real name but it measures the mircons within the pipes you are vaccing out) if the system does not hold under 500 microns you know your in trouble.
love this quote
"All things are possible until they are proved impossible - and even the
impossible may only be so, as of now."
-
10-03-2013, 11:53 AM #16
Re: ofn regulator
I'd bet they have broken their regulator and rather then admit it to their manager they have brazed onto the bottle connector.
Remeber talking to a guy in NRS few years back, he said out of his company they only had two vac pumps, the rest of the guys had eith broken theirs or sold them on ebay.... Shocking what goes on....Mostly found in Oxfordshire, UK :)