Results 1 to 12 of 12
Thread: Samsung DVM series problem.
-
26-02-2013, 07:32 PM #1
Samsung DVM series problem.
Hello to everyone.I have alarm Eo to the above model.Can anybody help?The alarm appears to both indoor units.
-
26-02-2013, 08:55 PM #2
Re: Samsung DVM series problem.
Sorry, don't recognise the E0 code, try this download for error codes...
http://www.logicool-ac.com/samsung_t...0Diagnosis.pdfBrian - Newton Abbot, Devon, UK
Retired March 2015
-
27-02-2013, 01:05 AM #3
Re: Samsung DVM series problem.
Thanks for reply Mike.I have this manual.I cannot find anything.The outdoor unit is with R22.
-
27-02-2013, 05:17 AM #4
Re: Samsung DVM series problem.
Malfunction in the outdoor block:
• Temperature or pressure sensor is faulty.
• EEV (after 6 - го mistake detection) is faulty.
• Wrong alternation of power phases or lack of a phase.
• Disruption of communication with the outdoor block.
-
27-02-2013, 06:38 AM #5
Re: Samsung DVM series problem.
Thanks for the help RusBuka.Do you have the troubleshooting of that alarm?I also have an indoor four way cassete where the five leds (filter-fan-on,off-timer-defrost)flashing.The manual says Eeprom option error.What is the meaning of this alarm?
-
27-02-2013, 03:29 PM #6
Re: Samsung DVM series problem.
This mistake arises on the wire MCM-A100 panel which allows to operate functionality and is connected to the central panel. Unfortunately at me manual only in Russian.
Concerning EEPROM and the indoor block, write its model.
-
27-02-2013, 03:37 PM #7
Re: Samsung DVM series problem.
Mmmm, find what you need)))
http://yadi.sk/d/wwcEmzBf2w-vQ
-
27-02-2013, 05:30 PM #8
Re: Samsung DVM series problem.
Indoor cassete model AVMCH070.
-
28-02-2013, 02:42 PM #9
Re: Samsung DVM series problem.
Try to enter an option code from the wireless panel
04 52 00 1C 00 00
If not in a course as to do it, read a manual. It if the code flied. I precisely don't remember, whether it is possible to register with s-net without the panel.
http://www.kvent.com/litterature/SAMSUNG/dvm-manual.pdf
-
28-02-2013, 09:31 PM #10
Re: Samsung DVM series problem.
Thanks for help rusbuka.
-
05-03-2013, 07:30 PM #11
Re: Samsung DVM series problem.
What could be the reason for the indoor unit to lose its code?
-
05-03-2013, 10:50 PM #12
Re: Samsung DVM series problem.
Usually from electricity failures. At you it turned out to enter an option code?