Results 1 to 18 of 18
Thread: twin tip brazing fitting
-
04-04-2012, 11:21 PM #1
twin tip brazing fitting
Does anyone know where I can get a twin tip fitting for oxy/acy in the Uk?
The sort that can heat the pipe from both sides for brazing larger diameter pipes?
-
04-04-2012, 11:47 PM #2
Re: twin tip brazing fitting
BOC or any of their partners.
.
-
05-04-2012, 09:05 AM #3
Re: twin tip brazing fitting
They were the first people I asked and our local branch said they don't do them??
-
05-04-2012, 06:27 PM #4
Re: twin tip brazing fitting
Their Slough branch supplied mine about 2 years ago...
(But I prefer the "pepper pot" nozzle anyway)
.
-
05-04-2012, 09:16 PM #5
Re: twin tip brazing fitting
Viking
is the pepper pot better for 4"?
AlecMostly found in the southern part of this green and pleasant land.
-
05-04-2012, 09:33 PM #6
Re: twin tip brazing fitting
Pepper pot works treat on any size Al.
Cheers
StuTool's ? check ! Condom's ? check !
If you can't fix it , f*ck it !!!
-
05-04-2012, 10:21 PM #7
Re: twin tip brazing fitting
dont use them on mitsi compressors as i did 1 once on the roof of a shopping ctr,it was windy and i thought -pepper pot-no messing- problem was i got the stubb too hot and melted the solder onto the suction accumulator! but for 4 inch pipe if u cant get a pepper pot in then flare it! haha
-
06-04-2012, 06:29 PM #8
-
06-04-2012, 07:10 PM #9
-
06-04-2012, 07:22 PM #10
Re: twin tip brazing fitting
here you are: www.srw.co.uk/cgi-bin/bb000003.pl?PRODUCTPAGE=Welding_Set_Spares%2ehtml&ACTINIC_REFERRER=http%3a%2f%2fwww%2esrw%2eco%2euk% 2fcgi%2dbin%2fbb000003%2epl%3fPRODUCTPAGE%3dWelding_Sets___Equipment%2ehtml You`ll have to register to enter the shop.
-
06-04-2012, 10:21 PM #11
-
07-04-2012, 04:32 PM #12
Re: twin tip brazing fitting
I'm not registering for yet another website. If they want my business they will let me brouse without registering. Anyone want to post a pic and price of the dual tip? I'm looking for one.
-
07-04-2012, 08:12 PM #13
Re: twin tip brazing fitting
try your luck here Mike.
http://www.weldinggear.co.uk/Gas-Con...NOZZLE_276.htm
-
07-04-2012, 08:54 PM #14
Re: twin tip brazing fitting
hook_tip.jpgt_SCORPION_TIP.jpgsorry about the size of the scorpion tip but they give you an idea of what they are
-
07-04-2012, 09:15 PM #15
Re: twin tip brazing fitting
Thanks glenn,
Have got an SRW account so will look them up although from comments I may be better off sticking with the good old pepperpot.
regards,
djbe.
-
10-04-2012, 11:55 AM #16
-
10-04-2012, 12:07 PM #17
-
13-08-2012, 05:33 PM #18