Results 1 to 9 of 9
Hybrid View
-
19-08-2005, 11:40 AM #1
Re: Leaving conditions of DX HELP REQUIRED!!!
I will second with PETER
WAMBAT
we all know Sensible heat= 1.08 x cfm x Temp difference
Here u calculated 38000BTU/hr
addin bypass factor in above and subtractin from total gives latent heat. thats basic thermodynamics.
But mate question is how to select evaporating temperature without it no DX coil in world may be designed
also how can u guess RH of leaving air?
we can all calculate wet bulb what about dry bulb
again i wud repeat my question and it is
"what will be evaporating temperature?
and Dry bulb of leaving can u calculate these by drawing on psychometric chart?
what is criteria for choosing evaporating temperature in relation to leaving DB/WB?"
Its a question that i have been trying to find out for somewhile now. I will appreciate if someone comes up with some clue about itOur nose is our personal air-conditioning system: it warms cold air, cools hot air and filters impurities
Similar Threads
-
Air Source Heat Pump - temp of refrigerant leaving evaporator
By anup in forum FundamentalsReplies: 3Last Post: 06-11-2006, 05:04 AM -
Chart for the "whys of conditions?
By frankiee in forum FundamentalsReplies: 5Last Post: 30-04-2006, 09:26 PM -
Required Control Wiring 50dp-020-910 Carrier
By altaf22m in forum Air ConditioningReplies: 2Last Post: 08-08-2005, 06:08 PM -
leaving dry and wet bulb difference of Evaporator coil
By abbasi in forum FundamentalsReplies: 4Last Post: 10-06-2005, 12:25 AM -
Power required in a compressor
By Friobernal in forum FundamentalsReplies: 3Last Post: 06-02-2003, 02:21 PM