Results 351 to 400 of 521
Thread: What did we do today?
-
05-03-2012, 11:03 PM #351
-
18-04-2012, 08:38 PM #352
Re: What did we do today?
today i changed a compressor(aspera) in a coffin fridge,wired and charged with gas(404)
im only a 2nd year epprentice so it was perfect practice,cooling perfectly,very proud ha
-
03-06-2012, 01:26 PM #353
Re: What did we do today?
Went to a bitzer larder fridge that was reported to be freezing up. When I arrived the controller displaying 7.8 deg and no sign of ice and not pulling down when running. Checked discharge temperature and was quite cool and could feel intermittent liquid slugging through cap. Did a quick leak check with sniffer but non found, noticed pot had been replaced and line tap had been used to access system so suspected leak. Topped off and unit pulling down from 12 deg to - 0.5 deg within ten minutes and discharge temperature much higher and no intermittent liquid flow.
Somebody must have left the door ajar causing evap coil to freeze.Training may be finished but experience is never complete.
-
03-06-2012, 03:37 PM #354
Re: What did we do today?
Disconnected a milk tank i put in 14 years ago! Going to a new home with a cheese maker
Mostly found in Oxfordshire, UK :)
-
03-06-2012, 04:12 PM #355
-
03-06-2012, 04:21 PM #356
-
03-06-2012, 04:26 PM #357
Re: What did we do today?
i was dragged round a swedish furniture store for about 2 hrs- felt like 6hrs got away with only buying a few nick nacks- but got a feeling it was a reconisense mission for a big on line order!!!!- hopefully the carpet fitters will stall her a bit!
-
03-06-2012, 04:58 PM #358
Re: What did we do today?
Bought a new LG fridge freezer [ or Sharp..] after my old one gave up some two weeks ago.
-
04-06-2012, 08:26 AM #359
Re: What did we do today?
What i'm going to do tonight, in about 3 and 1/2 hours.. Not that i'm into astrology, but there is going to be a partial eclipse of the moon, visible along the East coast of Aus.
With my luck... there will be cloud cover or fog
Or be taken by a Python down the back yard.....
Oh, was back at the morgue today, Innotec controller is playing up again. Some Genius fitted a controller that is way too sophisticated for that application, and to avoid a lengthy "off" time to rewire, i have to fly in another of the same modelTo the optimist, the glass is half full. To the pessimist, the glass is half empty.
-
04-06-2012, 11:05 AM #360
-
04-06-2012, 11:07 AM #361
Re: What did we do today?
went to see the old folks, mum in law losing it. Stresses the other half out, oh well.
-
04-06-2012, 06:06 PM #362
Re: What did we do today?
What, you didn't fix it??????
It runs on R-290 which I cant get here, its 6 years old and its too small anyway,oh, and also the electronic control relay was going on and off until the compressor was tripping on high temp.
Might as well get a new one.
-
06-06-2012, 11:14 PM #363
Seal Feeding
Went sea fishing this evening, just off the local promenade when one of the local wild seals came around for her supper.
So we, the fishermen, were catching mackerel and passing it to the onlookers to feed to the seal.
She's quite a friendly creature, I even ended up hand feeding her by handing over the sea wall. A bit like a well trained black labrador, albeit a lot bigger, she just rose gently up out of the water to take the fish out of my hand. No snapping, just a slow close of the mouth over the fish and then a slide back under the surface.
Amazing feeling, I'm quite laid back right now....Brian - Newton Abbot, Devon, UK
Retired March 2015
-
07-06-2012, 12:51 AM #364
Re: What did we do today?
replaced a shaft seal in a 100hp Grasso,then fixed a moisture prob in a zanotti on a transit van ,i love it!
-
07-06-2012, 06:14 AM #365
Re: What did we do today?
Flying to Paris to discuss new VRF certification programme with Eurovent.
Yesterday evening swapped a condesning unit over for a friend of mine. 20 feet off the ground
hanging on by one hand working with the other. Made me appreciate how easy my life really is.
:-)
-
07-06-2012, 04:09 PM #366
Re: What did we do today?
Started work at 11am finished at 15.30 got paid from 8am-17.00....sat in the van most of it, had a Mc donalds...not bad! 11days left of this bull!
-
07-06-2012, 09:55 PM #367
Re: What did we do today?
Nice one Brian. Babbacombe?
In the words of David Byrne, Well...How did I get here?
-
07-06-2012, 09:57 PM #368
Re: What did we do today?
Been in Bristol last few days looking for a leak on VRF. eventually traced to LEV within a ducted unit.
In the words of David Byrne, Well...How did I get here?
-
07-06-2012, 10:34 PM #369
-
07-06-2012, 11:18 PM #370
-
08-06-2012, 01:11 AM #371
-
29-06-2012, 09:10 AM #372
Re: What did we do today?
Busy day got called to a job 2 x ac units not heating checked and discovered some lucky bstard had pinched the outdoor units copper price must be getting up there Hmmmmm
-
29-06-2012, 11:05 PM #373
Re: What did we do today?
Unfortunately, I had to put my avatar (Sydney, the 14 year old Shepherd, collie, malamute and wolf) to sleep on Wed night. Had a bad back and she barked too hard at the pizza delivery man, probably cracked a vertebrae. Never heard a dog in so much pain.
-
30-06-2012, 08:48 AM #374
Re: What did we do today?
Just found out they have given the go-ahead for me to waste 5 days baby sitting the olympic canoe park. Gotta be there 9-6 for the whole 5 day event..
They want a 4hr g.tee fix time. With ABS pipe needing 24 hrs curing time they will be sadly disappointed DSC03650.jpgDSC03649.jpgDSC00817.jpgLast edited by r.bartlett; 30-06-2012 at 09:08 AM.
-
02-07-2012, 08:32 PM #375
Re: What did we do today?
Ended up today at a customer with a freezer room gone soft(30k of kevlar). Copeland semi going out on it's klixon. (turns out they may have noticed it friday but didn't report it...;-)
Ended up shorting the klixon out and setting a hose pipe on the body to keep it cool.. Let it run for a couple of hours and the room was dropping slowly. Hopefully it will last long enough we can get back with a new condensing unit :-/
-
02-07-2012, 09:03 PM #376
Re: What did we do today?
Traveled from Wigan to Windsor to pop a cassette condensate pipe back into it's pump after some ****head had dislocateded it. (we left site 3 months ago,nobody knows anything!!)
Then off to another Windsor job to measure up for external pipework covers, to find some kitchen fitter had already done it with some formica..
What I really need is a subbie in Windsor / Newbury. All our work is there recently.
Eggs
-
04-07-2012, 10:12 PM #377
Re: What did we do today?
Stuck all afternoon early evening at Force India. EJ and PDR doing a piece for the BBCPDR.jpg
-
04-07-2012, 11:09 PM #378
Re: What did we do today?
looks like pdr could do with showing how a knife and fork works- haha
-
05-07-2012, 12:47 AM #379
-
05-07-2012, 06:03 AM #380
Re: What did we do today?
Put two packs on vac last night in pissing down rain and pitch black. Came in in morning expecting a good torr on system.No torr!!!!!!!!!!!. Forgot to open main suction valves on ringmain. WHAT A PRICK,
-
05-07-2012, 08:32 AM #381
-
07-07-2012, 02:46 PM #382
Re: What did we do today?
Stayed in bed until the afternoon after a late one!
-
07-07-2012, 04:31 PM #383
Re: What did we do today?
Had another main contractor go bust on me No indication, previously a good payer, BANG!!!! Gone.
"Sorry mate, your not going to get paid" This one has been up and running since 1974.
Eggs
-
07-07-2012, 04:35 PM #384
Re: What did we do today?
Aouch,
Always hurts.
Hope you will be OK.
-
07-07-2012, 09:31 PM #385
Re: What did we do today?
Put new brushes on my LT alternator, Added a bit of R22 to old Carrier, was leaking through the schraders. slow day.
-
07-07-2012, 10:15 PM #386
Re: What did we do today?
Woke up late, went down shop, got beer and naan bread, made curry, ate curry and drunk beer
Mostly found in Oxfordshire, UK :)
-
23-07-2012, 08:46 PM #387
Re: What did we do today?
Found this moisture problem the other day...
http://www.youtube.com/watch?v=-r20c...&feature=g-uplMostly found in Oxfordshire, UK :)
-
25-07-2012, 02:58 AM #388
Re: What did we do today?
I had a fun day holding a Garden hose melting ice out of Multi Deck Produce Cases. But in doing so I unlocked the mystery of how Case Manufactures design " High Efficiency" cases. They use Very tight Fin Spacing on the Evap and when the coil freezes over, it stops removing BTU's...
-
25-07-2012, 09:15 PM #389
Re: What did we do today?
Went debt collecting. It's amazing how quickly the to$$ers pay up when you arrive in their reception demanding money, looking a little menacing
Suckers think you will actuall miss their non-paying business
On a lighter note, won another job in Newbury!!! what is it with this place?? I'm sick of going there.
Eggs
-
25-07-2012, 09:42 PM #390
Re: What did we do today?
eggs- sub it to monkeyspanners or rb- saves going down yonder!
-
25-07-2012, 09:45 PM #391
Re: What did we do today?
got some of that to do soon,but today finished off compressor swap 6hp maneurop,swapped it from r22 to 404a all good but man was it hot today ,helped an old mate with setting up an eliwell then checked over a van unit ;;hubbard;;
-
27-07-2012, 06:55 PM #392
Re: What did we do today?
Went to site today to fit a new compressor, only to find the wrong one has been supplied.
Sent Shift and Lift guys on their way, then spent 2 hours on the phone trying to sorce the correct compressor.
Nearly 7.00pm now and still waiting for return calls.
The hardest part was trying to explain to the store Manager that he'll have another few days of emptying and restocking fridges as the outside temp rises and falls because the pack is down a third on capacity and can't cope.Last edited by NIKK38; 27-07-2012 at 06:56 PM. Reason: typo
-
29-07-2012, 04:26 PM #393
Re: What did we do today?
Well, it started off ok but one mile up the road the charging light came on in my van and the power steering went. I came back home to find smoke wafting from the alternator. I`d only replaced it six months ago but do you think I can find the reciept/gaurantee?.....no way. I`ve got reciepts for boxes of screws ect for £2 dating back four years but one for £140 six months back? not a chance. The alternator`s been replaced so the job I was going to do will just about cover it grrrrrrrrrrrr.
-
29-07-2012, 07:29 PM #394
Re: What did we do today?
On Call this weekend. Had a Call this A.M. about 1 hour away.....Got on site and realized I left my tool bag in my garage.
-
29-07-2012, 08:33 PM #395
Re: What did we do today?
Spent all day in the canoe park getting well paid to tan :-)
-
03-08-2012, 07:37 AM #396
Re: What did we do today?
Final day at the canoe park and we won a gold and silver.. The place was rocking!
DSC04710.jpgDSC04704.jpg
DSC04700.jpg
The centre manager on the first day said "I like seeing you doing nothing as it means there is nothing wrong" So taking full advantage, We wandered around the inner ring on day 1&2 then was told to go help fill the accreditation seats for the rest of the event so had the best seats in the house.
The Centre got voted venue of the games by a BBC poll so site management were overjoyed to say the least....
All good and our part went off without a single hitch and we watched every session after being fed and watered.
-
04-08-2012, 12:28 AM #397
Re: What did we do today?
Sitting up all night watching NZ get a couple of Golds in rowing. Now knackered on saturday
-
05-08-2012, 08:00 AM #398
Re: What did we do today?
Weekend off call , ready for the influx during the week , still done company tasks though , wash the hearse & sort + clean + components ,tools & mechanics.
The primary function of the design engineer is to make things difficult for the fabricator and impossible for the serviceman.
-
08-08-2012, 02:28 AM #399
Re: What did we do today?
I took off a Cap on a Oil line and found out there was no Schrader Core inside. Oil at 60 PSI makes a big mess...Oh well, the days done and now im having a Beer. CHEERS
-
08-08-2012, 08:22 AM #400
Re: What did we do today?
5 psi makes a mess, 60 psi?.. bet you were covered from head to toe in oil and had to drive home in your undies
Hmmm, Having some trouble with a walk in freezer room. Compressor change went fine. Customer now says there was sparks coming out of evaporator Before i started this job.... Today's inspection revealed nothing out of the ordinary, so now waiting for that problem to show itself And No!! Compressor was definitely cactus.....maybe the shop owner was under the influence of a specific mushroom.Last edited by mikeref; 08-08-2012 at 08:29 AM. Reason: spelling, and alcohol adjustment :)
To the optimist, the glass is half full. To the pessimist, the glass is half empty.
Similar Threads
-
What did you do today?
By TimSaxon in forum TransportReplies: 22Last Post: 26-11-2010, 08:40 PM -
38 today
By bernard in forum Chit Chat & Service StoriesReplies: 7Last Post: 24-06-2007, 09:14 AM -
don't put off until tomorrow, do it today!
By eggs in forum Chit Chat & Service StoriesReplies: 2Last Post: 20-10-2004, 09:06 PM -
Iraq today, but who was innocent yesterday
By shogun7 in forum Chit Chat & Service StoriesReplies: 10Last Post: 18-10-2004, 09:58 PM