Results 1 to 4 of 4
-
29-04-2012, 11:38 AM #1
ITE WS150 scale showing 5kg all the time
I have an ITE WS150 scale that were showing a fault code in the display that read something like add rett. I read the instructions on the box and managed to get into the programming parameters but now the display is showing 5kg. And I can't seem to get the display to tare and display zero.
Does anyone know how to reset this type of scale as I have tried everything.
Training may be finished but experience is never complete.
-
29-04-2012, 12:27 PM #2
Re: ITE WS150 scale showing 5kg all the time
Check your email my friend.
I would post the recalibrating procedure only at 1mb it's a little large.
I had a similar problem and was sent the attached (to your email) by way of a remedy.
It's a right Pi**a when they throw a wobbly is it not? And not cheap.
Good Luck Grizzly
-
30-04-2012, 07:10 AM #3
Re: ITE WS150 scale showing 5kg all the time
Hi Chillwilly.
Did you get the email?
GrizzlyLast edited by Grizzly; 30-04-2012 at 09:05 AM.
-
02-05-2012, 08:27 PM #4
Re: ITE WS150 scale showing 5kg all the time
Yes I did thankyou for that. I'll give it a try as soon as I get back home. Thanks again.
Training may be finished but experience is never complete.