Results 1 to 5 of 5
Thread: Oil Pressure Switch
-
15-01-2012, 04:17 PM #1
Registered User
Hey, I am new to : RE
- Join Date
- Jan 2012
- Location
- Indonesia
- Posts
- 1
- Rep Power
- 0
Oil Pressure Switch
Hi..
I have two compressor Bitzer 25HP for the freezer room.
on each compressor, I plug the oil pressure switch " Danfos MP55", but one of the Oil pressure switch is not working when the oil level is low.
I want to know how to install the Oil Pressure Switch,electrical wiring connection of Danfos MP55 with Compressor and Panel control box, so that the compressor remains safe and prevented from damage.
I really appreciate for all your answers ..
Thanks,
S
-
15-01-2012, 05:28 PM #2
Moderator
Site Moderator : and general nice guy
- Join Date
- Sep 2003
- Location
- ISRAEL
- Age
- 72
- Posts
- 4,248
- Rep Power
- 46
Re: Oil Pressure Switch
-
16-01-2012, 09:46 AM #3
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Apr 2009
- Location
- israel
- Age
- 50
- Posts
- 778
- Rep Power
- 19
Re: Oil Pressure Switch
HI
as posted above & http://mail4.ansal.com.ar/Documentacion/pdfs/960649.pdf
good luckTHE DEFINITION OF A SMART PERSON IS ONE WHOM LEARNS FROM HIS MISTAKES!!!
-
16-01-2012, 09:48 AM #4
improving poster
- Join Date
- Jan 2012
- Location
- Pakistan
- Age
- 44
- Posts
- 31
- Rep Power
- 0
Re: Oil Pressure Switch
Danfoss OP.pdf
hi dear find the attached file
it will help you to solve it
-
16-01-2012, 10:01 AM #5
improving poster
- Join Date
- Jan 2012
- Location
- Pakistan
- Age
- 44
- Posts
- 31
- Rep Power
- 0
Re: Oil Pressure Switch
sorry Dear one thing was missing
PIN T2
should be connected with the auxilary point of compressor's magnetic contactor
its mean that when compressor's contactor will be ON then a phase will be supplied to the PIN T2 through Auxilary point of magnetic contactor of compressor.
