Results 301 to 350 of 521
Thread: What did we do today?
-
21-10-2011, 09:07 PM #301
-
21-10-2011, 09:14 PM #302
Re: What did we do today?
Congrats on the passing! Still working on the new split, been a busy 2 weeks, only able to do little bits as and when. Been so long a rock dove has made it's home in the hole with the blocks, and laid an egg. At least the unit is in and cooling, and the room is mostly repainted ( none of the old colour is left, and I have a lot of the new colour around so did the 2 coats, but it needs 3 and some touch up - only 2 drips on the floor ) with touch ups to do next week.
-
21-10-2011, 09:15 PM #303
Re: What did we do today?
Belt drive tecumseh thingy, old lorry body now static. Bolt sheared off, shaft worn pulley and fan fell off brushed the condenser fins.
Looks old enough to be on R12 or drop in so thinks its time to move into the 21st century!
Might try and rescue it and make a recovery unit that don't take hours to recover a few kgs
JonMostly found in Oxfordshire, UK :)
-
22-10-2011, 01:31 AM #304
Re: What did we do today?
Hi Jon
'Old Skool' tricks mate reminds me of working on that type with no leccy in sight, running the unit to 'self recover' the refrigerant and then again to 'self vac'.... you could get away with it to get you out of trouble back then with 'MO' but slightly frowned upon these days.... would have to get a genny I suppose
If unit will run, I always pump it down & push/pull the liquid out first, then suck the vapour, saves a lot of time especially when I got to transfer 100+kg.... then same when charging, it just flys in
R's chillermanIf the World did not Suck, We would all fall off !
-
26-10-2011, 07:29 AM #305
Re: What did we do today?
Removed and installed a dual water cooled condenser on a 30 year old 80 Kwatt air con unit.
Did all the work myself with only the aid of my apprentice to help remove and put back in.
Allowed the apprentice to pressure test, charge and commission while I watched.
Got the apprentice to check and set the superheat and I watched.
Allowed the apprentice to get me a coffee while I checked his work then t watched.
Got back in the van only to find another job to do, damn thought it was gonna be a short day....
-
26-10-2011, 11:56 AM #306
Re: What did we do today?
This week I am trying to get my 5kw PV system installed before my contract deadline. At $.80/kwh paid for 20 years, its worth it.
-
26-10-2011, 12:19 PM #307
Re: What did we do today?
Curretnly trying to weld a leaky Toshiba shrm condenser.. having a bit of a mre tbh
-
26-10-2011, 04:17 PM #308
Re: What did we do today?
Wet weather today, so my main job was to change a fan motor in a domestic ducted split.
You know how you need long allen key wrenches to go through the fan barrel to the grub screw?
And the long side of the allen key wrench is often 'balled' so it can be used at an angle?
Yeah, mine snapped off at the weak thin point of the allen key wrech in the grub screw. So packed up my gear, buggered off and ordered a new barrel fan for one side
Had the wrench set for years and years, and it was 4mm hex that snapped too, the most used one that had to choose that time to fail. Why couldn't it have failed in a outdoor service valve where it could have been drilled out? I don't think anyone sells a 25cm long 2mm drill bit so impossible to drill it out on the indoor fan motor fan. While anywhere else it wouldn't have been a "give up and go home" moment
Refrig install side of the business sorted out with a cheap installer like I mentioned elsewhere/before. Spent the afternoon trying to find someone decent for evaporative cooler work as I get a lot of that and not interested myself.
Never will get successful on the tools all by myself, too busy in summer, too many jobs and phone calls, too many annoyed people doing more harm than good knowing my phone number with me flat out...
So I'm trying to get together a team of good people I can sub off too that don't charge the earth so I can still add mark up and be competitive... While I just stick to the repair side of things.Last edited by paul_h; 26-10-2011 at 04:27 PM.
-
26-10-2011, 07:30 PM #309
Re: What did we do today?
Had to pull a broken coupling out of an Atlas Copco drum dryer. A right pain as the coupling was 500mm inside the dryer. We drilled and tapped a 12mm hole and fitted studding to make a puller to remove it.089.jpg096.jpg094.jpgThe third picture is my son using our high tech puller, doing some work for once! he`s moving on soon so we won`t be working together anymore. We have great fun working together, it makes the day go quicker
-
30-10-2011, 01:13 AM #310
Re: What did we do today?
Today, I got my 12,000 BTU Toshiba A/C compressor. So I can finally move forward with my projects and use the old small one as a vacuum pump.
Visit http://www.kompulsa.com/ for technology news, reviews, and more. Twitter: Kompulsa.
-
31-10-2011, 04:17 AM #311
Re: What did we do today?
Well, good luck with that kompulsa. Was on the blower (phone) to Skope New Zealand. Warranty issues with hardware on a cabinet of theirs, however, Mad F never told us about The city of Christchurch current condition?? City business district only open now to the public after that major earthquake, so long ago now. Businesses working out of containers? 20,000 people went through CBD over the weekend. Hmmm.
To the optimist, the glass is half full. To the pessimist, the glass is half empty.
-
05-01-2012, 04:36 PM #312
Re: What did we do today?
Did two site surveys, took a ratchet and spanner back to wholesalers that was left in a special build unit they supplied and got a new monkey wrench!!!
Mostly found in Oxfordshire, UK :)
-
05-01-2012, 04:42 PM #313
Re: What did we do today?
Put up a few shelves for the boss ,drank way to much coffee,watched stupid videos on youtube and generally dossed about.All this time off is starting to bore me.
Gotta look at a coldroom and a serve over tomorrow in exchange for free beer , should be a good Friday so.
Cheers
StuTool's ? check ! Condom's ? check !
If you can't fix it , f*ck it !!!
-
05-01-2012, 06:50 PM #314
-
05-01-2012, 07:09 PM #315
Re: What did we do today?
Tool's ? check ! Condom's ? check !
If you can't fix it , f*ck it !!!
-
05-01-2012, 09:13 PM #316
Re: What did we do today?
Ahhhh, what a life in Ireland.....Him drinkin beer and I'll be on a roof putting up another solar system.
-
05-01-2012, 09:16 PM #317
Re: What did we do today?
mike-u have to have ginger hair to be a true paddy!!and pale skin helps!
-
05-01-2012, 09:36 PM #318
-
05-01-2012, 11:26 PM #319
Re: What did we do today?
To the optimist, the glass is half full. To the pessimist, the glass is half empty.
-
05-01-2012, 11:38 PM #320
-
11-01-2012, 07:55 PM #321
Re: What did we do today?
Dentist
and in mid flow he says ''your tonsils look inflamed, I recommend bla bla bla"
I said " what ! thats like taking technical fridge advice from a gas man "If the World did not Suck, We would all fall off !
-
11-01-2012, 08:34 PM #322
Re: What did we do today?
Tried to take 3 units off a 16 indoor VRV system and re-assign the group numbers, but they were all addressed (stickers) incorrectly, so ended up re-grouping the whole lot......aaggghhhhhh!!!!!
-
11-01-2012, 10:33 PM #323
Re: What did we do today?
Today I searched the "situations vacant" as I will be out of work by the end of the month.
Shyte 2011 & 2012 looks like it's going the same way.
Anyone need an A/C sales/design/project management/product management or account management guy with 35 years experience in the Beds Herts or Bucks area of UK?If in doubt read the instructions. If still in doubt follow them.
-
11-01-2012, 11:11 PM #324
Re: What did we do today?
Hi Greengrocer
maybe worth a butchers http://www.jobsite.co.uk/job/area-sa...421?src=searchIf the World did not Suck, We would all fall off !
-
11-01-2012, 11:23 PM #325
Re: What did we do today?
Thanks Chillerman.
Currently I'm talking to all the usual suspects / agencies & personal contacts in the industry.
Seems to me that the agencies are a waste of time & post ghost jobs on their websites to attract CV's from the likes of me & then punt them around the industry. In truth they don't have any tangible or factual jobs on offer at all!!
My search goes on.If in doubt read the instructions. If still in doubt follow them.
-
11-01-2012, 11:28 PM #326
Re: What did we do today?
Most agencies yes, you have their cards marked right, but ring the london office http://www.prsjobs.com/contact/ and ask to speak to Dave Haxell... can highly recommend Dave and he will not punt your cv about... also will only send your cv to a company after you have all the job/company details and are sure you want the role
If the World did not Suck, We would all fall off !
-
11-01-2012, 11:39 PM #327
-
12-01-2012, 12:02 AM #328
-
12-01-2012, 12:10 AM #329
Re: What did we do today?
Threw some more up today (solar panels), same as Monday. One more to do this week, weather permitting currently 4C and a bit windy.
-
12-01-2012, 12:16 AM #330
-
12-01-2012, 12:52 AM #331
Re: What did we do today?
Hell no....I've had enough until War horse comes (don't think it is a musical, but it is live)
-
12-01-2012, 12:56 AM #332
Re: What did we do today?
BTW, if its raining/snowing I ,too, will be doing the shelving and beer jobs
-
12-01-2012, 01:45 AM #333
-
12-01-2012, 02:06 AM #334
-
12-01-2012, 02:09 AM #335
-
12-01-2012, 02:15 AM #336
Re: What did we do today?
is that how it's spelled "phroar"? Always heard the Python folks do it but never could spell it.
-
12-01-2012, 02:17 AM #337
Re: What did we do today?
Hey.....1000 posts, beer is on me.
-
12-01-2012, 02:21 AM #338
Re: What did we do today?
I'll have a shandy .... cheers
If the World did not Suck, We would all fall off !
-
12-02-2012, 06:33 PM #339
Re: What did we do today?
Did a cowboy job today on a Samsung. Been running, but every so often will quietly stop cooling. No alarm or anything, and turning off at isolator and back on works. Changed sensor assy, remote control, controller board and Micro board all at once, as I have a "spare" indoor unit to hand, not used, but waiting in the corner for whenever another one drops a blower fan or clogs up solid. Seems to be holding up, and I am suspecting it is the old problem of dodgy sensor assemblies, as I have changed those often enough under warranty, but this one is 6 years old, and only the outdoor unit capacitor has died ( last week would you believe).
Another had the compressor case rust through as well, just outside the 5 y warranty. Things are tight, so repair it is, new condenser coil ( 3 out of 7 made it intact- the other 4 had the piping bent and broken by the couriers or the packing staff, will wait and offer a little more than scrap price for them, then cut out 4 rows and reuse them) and a slightly used Toshiba compressor ( would you believe out of stock at all suppliers, and those with stock are charging wounded buffalo for them) that will be made to bloody fit ( a little matter of 3 mounting holes that are going to move slightly around the circle) and give me a spare to place in service while I do 2 others.
Who knows, I might even get to finish installing the unit I started in Dec, been a little busy with other stuff and such. Doing a bit every week, as and when.Last edited by SeanB; 12-02-2012 at 06:34 PM. Reason: My poor spelling!
-
14-02-2012, 11:33 AM #340
Re: What did we do today?
Re-programmed some Innotech micro2000 thermostats after a power failure & investigated a tripped O/L, same site. Looks like it was the power spike as the I is ok & comfortably below the trip point. Had a fight with an Easy-20 condensate pump. Still not sure it's not going to be replaced, but a new one is around $450 list. Not good news for the client!
Yesterday had a protracted fight with some old flexi duct, replacing it with new. Bloody sparkles have thrown (literally) cables all over the place down the years & the downstream connection was tight between the inlets for a series/parallel vav. Two trips to the suppliers due to the installer's creative use of 400mm flexi to reduce to 350 (next time I'll remove the lot & measure BOTH ends!) & about 5 hours later it's all done, cleaned & hoovered. Length? About 2.5m!!!
-
14-02-2012, 07:10 PM #341
Re: What did we do today?
give some tlc to a 100hp grasso,had a look at some mobile racking in the cold store,then went chin wagging with an old fridge tec.
-
14-02-2012, 10:30 PM #342
Re: What did we do today?
Nothing much today. Waited for the bloody phone company to install new lines. Ohh, bought flowers.....tis that day of the year.
-
15-02-2012, 04:34 PM #343
Re: What did we do today?
What day would that be Mike? C.D.
NH3 for me
-
15-02-2012, 10:42 PM #344
-
15-02-2012, 10:47 PM #345
Re: What did we do today?
worked till 9,30 putting in a 5 inch pipeline for a new water main- got to get 120mtr of pipework through a college and water to all sinks,toilets,clipped every 1.2mtr,at 3 mtr height through door frames,over shutters oh and insulate it- all to be tidy,insulated and working for a 5 hr overtime bonus!-will update on sunday!!
-
16-02-2012, 12:40 AM #346
-
21-02-2012, 09:15 PM #347
Re: What did we do today?
a large cold store i look after was giving me a headache,tripping out on l/p when on defrost 50% of the coils defrost via glycol so one system keeps running while the other pumps down it was an intermittant fault with the mag valve on the one that was supposed to be open the problem is the valves are on the top of the store up and down the access ladder so many times ah well the excersize will do me good yeah right!.
-
05-03-2012, 08:35 PM #348
Re: What did we do today?
In an effort to save customer the cost of a new control system, spent 3 hours tracing a fault on circuit board and fixing, the repair lasted about ten minutes....
Always seems when you try and do someone a favour it bites you in the ass
JonMostly found in Oxfordshire, UK :)
-
05-03-2012, 10:31 PM #349
Re: What did we do today?
i repiped a water tank outlet to feed the heating system at the highest point- took 70 mins to core a 42 mm hole 1 metre deep-then found a tiny split in the tank,tried patching up to no avail,ended up replacing the tank,ball **** and 28mm tank connector- after all that it worked ,no problems
-
05-03-2012, 10:42 PM #350
Re: What did we do today?
To the optimist, the glass is half full. To the pessimist, the glass is half empty.
Similar Threads
-
What did you do today?
By TimSaxon in forum TransportReplies: 22Last Post: 26-11-2010, 08:40 PM -
38 today
By bernard in forum Chit Chat & Service StoriesReplies: 7Last Post: 24-06-2007, 09:14 AM -
don't put off until tomorrow, do it today!
By eggs in forum Chit Chat & Service StoriesReplies: 2Last Post: 20-10-2004, 09:06 PM -
Iraq today, but who was innocent yesterday
By shogun7 in forum Chit Chat & Service StoriesReplies: 10Last Post: 18-10-2004, 09:58 PM