Results 1 to 50 of 85
Threaded View
-
17-09-2011, 08:02 PM #11
VIP Poster
- Join Date
- Apr 2001
- Location
- New Port Richey, Florida - USA
- Age
- 79
- Posts
- 5,071
- Rep Power
- 35
Re: Frequent compressor cycling when using a ASHP for shower water heating alone
You stated earlier that the operating range is 45C-55C. You also stated that that compressor starts when the display reads 50C. This would lead me to believe that the display is showing (and starting from) water output temperature, since the input ranges down to 45C.
Last edited by Gary; 17-09-2011 at 08:05 PM.
