Results 1 to 4 of 4
Thread: Ag150 Mitsubishi controller
-
01-08-2011, 02:14 PM #1
Ag150 Mitsubishi controller
Hi all,
I have a vrf system with above central controller, there are no hard wired remotes in the rooms with ac.
Is there a way from the ag150 of puttin the units in to test run like you could with the g50s
If so could someone let me know
Cheers
-
01-08-2011, 07:11 PM #2
Re: Ag150 Mitsubishi controller
put in username initial and password init. then go to initial settings, in there you will see unit info. on the unit info screen you will see test run "use", press on it to select "use". you can then put your fan coils into test
-
02-08-2011, 05:26 PM #3
Re: Ag150 Mitsubishi controller
hi there thanks that worked, i was using administrator, admin login and thats why i could not change it.
many thanks regcool!
-
03-08-2011, 06:15 AM #4
Re: Ag150 Mitsubishi controller
You can use both for AG-150A, not really good practice but we used to login as initial/init for initial setting.
Both calling this web page eg., 192.168.1.1/g-50/en/administrator.html only for AG-150A, not for web monitoring via your laptop.
I am lazy, I prefer initial/init ....administrator is too long to tap on the touch screen.Last edited by JoeAT50A; 03-08-2011 at 06:17 AM.