Results 1 to 1 of 1
Thread: cascade - 90 degree
-
29-07-2011, 05:19 PM #1
cascade - 90 degree
hi all,
thanks for previous answer from mr. norseman.
the oil logging problem has solved already, cause i try to install heater at the cappilary
line its work well but depend on when that chamber reached the set point. (after compressor turn off and heater works almost 2 minutes).
my questions is :
a. do i realy need n pentane work with r 1150 to solve the oil problem.
b. n pentane can works together with r 1150
c. what kind of problem will come if we mix it both with the percentage.
thanks,
Best Regards,
Edi.
Batam Indonesia.